A case of forming chaotic attractors in cutting dynamic system

The conditions under which the chaotic dynamics is formed during the materials processing by cutting are analyzed. In the previous studies, in case of loss of sta-bility of the cutting process, limit cycles or invariant tori are generated in the neighborhood of the equilibrium system. Contrastingly to these studies, the case when the tool properties are such that a nonlinear positive feed-back is formed by flexural deformations is considered. A mathematical system model is provided for this case. On the basis of the numerical simulation, using the MATLAB application program package, the dynamic model parameters effect is explored under the conditions of the chaotic dynamics formation. The research results show that with increasing the parameters characterizing the formation of a positive feedback, the system undergoes a series of period-doubling bifurcations in the system of strange attractors. They are located in the vicinity of the equilibrium points and have a limited area. It is shown that the tool chaotic oscillations lead to the chaotic work surface forming, therefore, in the application sector, it is necessary to choose the parameters under which the chaotic dynamics is not formed. Although the considered examples relate to the cutting process, the obtained results are of general validity for the dynamic systems interacting with various environments, for example, with a tribological environment.

процесс резания материалов, динамическая система, инвариантные многообразия, хаотические аттракторы, бифуркации, material cutting process , dynamic system, invariant varieties, chaotic attractors, bifurcations

1. Drozdov, N. A. K voprosu o vibracijah stanka pri tokarnoj obrabotke. [On the issue of vibration machine for turning.] Stanki i instrument, 1937, no. 22, pp. 12– 17 (in Russian).

2. Kashirin, A. I. Issledovanie vibracij pri rezanii metallov. [Study of vibrations in metal cutting.] Moscow: AN SSSR, 1944, 282 p. (in Russian).

3. Sokolovskiy, A. P. Vibracii pri rabote na metallorezhushhih stankah. [Vibrations at work on machine tools.] Issledovanie kolebanij pri rezanii metallov: sb. tr. [Study on fluctuations in metal cutting: coll. of papers.] Moscow: Mashgiz, 1958, pp. 15–18 (in Russian).

4. Murashkin, L. S., Murashkin, S. L. Prikladnaja nelinejnaja mehanika stankov. [Applied nonlinear mechanics of machines.] Leningrad : Mashinostroenie, 1977, 192 p. (in Russian).

5. Albrecht, P. Dinamika processa rezanija metalla.[Dynamics of the Metal Cutting Process.] Konstruirovanie i tehnologija mashinostroenija: Trudy amerikanskogo obshhestva inzhenerov-mehanikov ASME. [Engineering Design and Technology: Proc. of ASME.] Moscow: Izd-vo Mir, 1965, vol.87, ser. B, no. 4, pp. 40–54. (in Russian).

6. Zharkov, I. G. Vibracii pri obrabotke lezvijnym instrumentom. [Vibrations at edge tool cutting.] Leningrad: Mashinostroenie, 1987, 184 p. (in Russian).

7. Tlustyy, I. Avtokolebanija v metallorezhushhih stankah. [Self-oscillations in machine tools.] Moscow : Mashgiz, 1956, 395 p. (in Russian).

8. Kudinov, V. A. Dinamika stankov. [Dynamics of machines.] Moscow: Mashinostroenie, 1967, 359 p. (in Russian).

9. Elyasberg, M. E. Avtokolebanija metallorezhushhih stankov: Teorija i praktika. [Self-oscillations of machine tools: theory and practice.] SPb.: OKBS, 1993, 182 p. (in Russian).

10. Weiz, V. L., Vasilkov, D. V. Zadachi dinamiki, modelirovanija i obespechenija kachestva pri mehanicheskoj obrabotke malozhestkih zagotovok. [Problems of dynamics, modeling and quality assurance at mechanical treatment of slender workpieces.] STIN, 1999, no. 6, pp. 9–13 (in Russian).

11. Zakovorotny, V. L., Flek, M. B. Dinamika processa rezanija. Sinergeticheskij podhod . [Dynamics of cutting process. Synergetic approach.] Rostov-on-Don: DSTU Publ. Centre, 2006, 876 p. (in Russian).

12. Zakovorotny, V. L., Pham Dinh Tung, Nguyen Xuan Chiem. Matematicheskoe modelirovanie i parametricheskaja identifikacija dinamicheskih svojstv podsistemy instrumenta i zagotovki. [Mathematical modeling and parametric identification of dynamic properties of the tool – workpiece subsystem.] Izvestiya vuzov. Severo- Kavkazskiy region. Technical Sciences, 2011, no. 2, pp. 38–46 (in Russian).

13. Zakovorotny, V. L., Bordachev, E. V., Alekseychik, M. I. Dinamicheskij monitoring sostojanija processa rezanija. [Dynamic monitoring of the cutting process.] STIN, 1998, no. 12, pp. 6–12 (in Russian).

14. Zakovorotny, V. L., Pham Dinh Tung, Nguyen Xuan Chiem. Modelirovanie deformacionnyh smeshhenij instrumenta ot-nositel'no zagotovki pri tochenii. [Modeling of tool deformation offsetting to workpiece in turning.] Vestnik of DSTU, 2010, vol. 10, no. 7, pp. 1005–1015 (in Russian).

15. Altintas, Y., Budak, E. Analytical prediction of stability lobes in milling. Ann. CIRP, 1995, vol. 44, iss. 1, pp. 357–362.

16. Balachandran, B. Non-linear dynamics of milling process. Philos. Trans. Roy. Soc. 359, 2001, pp. 793–820.

17. Davies, M. A., Pratt, J. R. The stability of low immersion milling, Ann. CIRP 49, 2000, pp. 37–40.

18. Gouskov, A. M., Voronov, S. A., Paris, H., Batzer, S. A. Nonlinear dynamics of a machining system with two interdependent delays. Commun. Nonlin. Sci. Numer. Simul., 2002, vol. 7, iss. 4, pp. 207–221.

19. Anishchenko, V. S. Slozhnye kolebanija v prostyh sistemah. [Complex oscillations in simple systems.] Moscow: Nauka, 1990, 312 p. (in Russian).

20. Anishchenko, V. S. Attraktory dinamicheskih sistem. [Attractors of dynamical systems.] Izvestija vuzov. Prikladnaja nelinejnaja dinamika, 1997, vol. 5, no. 1, pp. 109–127 (in Russian).

21. Neymark, Y. I., Landa, P. S. Stohasticheskie i haoticheskie kolebanija. [Stochastic and chaotic oscillations.] Moscow: Nauka, 1987, 424 p. (in Russian).

22. Li, T., Yorke, J. A. Period Three Implies Chaos. Amer. Math. Monthly, 1975, vol. 82, no. 3, pp. 982–985.

23. Lorens, E. N. Deterministic Nonperiodic Flow. J. Atmos. Sci., 1963, vol. 20, no. 5, pp. 130–141.

24. Dorfman, J. R. An Introduction to Chaos in Nonequilibrum Statistical Mechanics. Cambridge University Press, 1999, 288 p.

25. Feigenbaum, M. J. The transition to a periodic behavior in turbulent systems. Commun. Math. Phys., 1980, vol. 77, no. 1, pp. 65–86.

26. Bobrov, V. F. Osnovy teorii rezanija metallov. [Fundamentals of the metal cutting theory.] Moscow: Mashinostroenie, 1975, 344 p. (in Russian).

27. Zakovorotny, V. L., Pham Dinh Tung, Nguyen Xuan Chiem, Ryzhkin, M.N. Modelirovanie dinamicheskoj svjazi, formiruemoj processom tochenija, v zadachah dinamiki (skorostnaja svjaz'). [Dynamic coupling modeling formed by turning in cutting dynamics problems (velocity coupling).] Vestnik of DSTU, 2011, vol.11, no. 2, pp. 137–147 (in Russian).

28. Zakovorotny, V. L., Pham Dinh Tung, Nguyen Xuan Chiem, Ryzhkin, M. N. Modelirovanie dinamicheskoy svyazi, formiruemoy protsessom tocheniya, v zadachakh dinamiki (pozitsionnaya svyaz'). [Dynamic coupling modeling formed by turning in cutting dynamics problems (position coupling).] Vestnik of DSTU, 2011, vol.11, no. 3, pp. 30–38 (in Russian).

29. Kabaldin, Y. G. Samoorganizacijaja i nelinejnaja dinamiki v processah trenija i iznashivanija instrumenta pri rezanii.[Self-organization and nonlinear dynamics in processes of friction and tool wear under cutting.] Komsomolsk-na-Amure: Izd-vo KnAGTU, 2003, 175 p. (in Russian).