PROFILING HOB FOR MANUFACTURING GEAR ELLIPTIC PROFILE
Abstract
Hob equation is solved on the grounds of the earlier coordinate dependencies of the elliptical wheels tooth profile. Profile worm algorithm of the program for calculating the coordinates of the hob profile is presented. It can be used for making wheel gear elliptic profile.
About the Authors
Anatoly A. Ryzhkin
Don State Technical University
Russian Federation
Russian Federation
Vladimir V. Zotov
Don State Technical University
Russian Federation
Russian Federation
Denis V. Moiseyev
Don State Technical University
Russian Federation
Russian Federation
Anatoly A. Androsov
Don State Technical University
Russian Federation
Russian Federation
Gennady P. Grebenyuk
Don State Technical University
Russian Federation
Russian Federation
Mikhail V. Savenkov
Don State Technical University
Russian Federation
Russian Federation
References
1. Opredelenie koordinat bokovyh storon zub'ev koles s ellipticheskim profilem / A.A. Ryjkin
2. [i dr.] // Vestnik DGTU. — 2009. — T. 9, № 2(41). — S. 284—295. — in Russian.
3. Ryjkin A.A., Moiseev D.V. K voprosu analiticheskoi ocenki profilya ellipticheskogo zuba kolesa // Vestnik DGTU. — 2009. — T. 9, № 4(43). — S. 698—711. — in Russian.
4. Inozemcev G.G., Sergienko E.P. Profilirovanie chervyachnyh frez dlya peredach Novikova. — Saratov : Privolj. knijnoe izd-vo, 1968. — 143 s. — in Russian.
5. Grubin A.N., Lihcier M.B., Polockii M.S. Zuboreznyi instrument. — M. : Mashgiz, 1946. — Ch. II. — in Russian.
Review
For citations:
Ryzhkin A., Zotov V., Moiseyev D., Androsov A., Grebenyuk G., Savenkov M. PROFILING HOB FOR MANUFACTURING GEAR ELLIPTIC PROFILE. Vestnik of Don State Technical University. 2010;10(5):731-743. (In Russ.)
Views:
317
Email this article 