STUDY OF CULTIVATOR RESTRAINING SPRING KINEMATICS
Abstract
A comparative study of the restraining springs kinematics of the cultivator operating devices with various versions of the resilient member is done. Motion trajectories of the operating device nose bar on load on the bench tester are investigated. Advantages of the fuse with the double-bend elastic element operating on the buckling are marked.
About the Authors
Ivan V. IGNATENKO
Don State Technical University
Russian Federation
Russian Federation
Alexey P. МARKOV
Don State Technical University
Russian Federation
Russian Federation
References
1. Sineokov G.N. Teoriya i raschet pochvoobrabatyvayuschih mashin / G.N. Sineokov, I.M. Panov. – M.: Mashinostroenie, 1977. – 328 s. – In Russian.
2. Ignatenko I.V. Mashiny dlya vozdelyvaniya sel'skohozyaistvennyh kul'tur / I.V. Ignatenko, Yu.I. Ermol'ev. – Rostov n/D: Izdatel'skii centr DGTU, 2008. – 374 s. – In Russian.
Review
For citations:
IGNATENKO I., МARKOV A. STUDY OF CULTIVATOR RESTRAINING SPRING KINEMATICS. Vestnik of Don State Technical University. 2010;10(7):1047-1051. (In Russ.)
Views:
426
Email this article 