POLYMERIC COMPOSITE ELASTIC CONSTANTS DETERMINATION ON THE BASIS OF MODIFIED TECHNIQUE. THEORETICAL & NUMERICAL ANALYSIS
Abstract
The V-notch (standard ASTM D5379-93) shear test was investigated for determining the in-plane shear modulus. With purpose of lateral response exception the new scheme of test with specimen symmetrical loading is offered. For standard and modified schemes the comparative finite element analysis of state in a specimen's working area is executed. This analysis allow to determine the shape and sizes of a pure shear zone at different orientations of reinforcing fibers and geometrical tolerances, and to estimate error in determination of a shear modulus stipulated by averaging of shear stresses in specimen's working section. The results have shown full coincidence of stress-strained states at standard and modified schemes of tests. Our numerical evaluation shows that even for specimens with ideal shape using of mean shearing stress (relation of an applied force to a sectional area between notches) always increase error of shear module determination more than 15 % and for obtaining more precise results it is necessary to padding definition of shear stresses in center of a working area with FEM analysis. For using in actual experiment, when there are geometrical errors of the shape and fastening of specimens, but the remaining modules are determined irrespective of considered tests, the effective iterative scheme on the FEM based numerical experiment for refinement and for definition of a shear modulus values confidence interval is offered.
About the Authors
А.A. BYCHKOVRussian Federation
A.N. SOLOVIEV
Russian Federation
A.V. FOMIN
Russian Federation
O.D. PAHANYAN
Russian Federation
S.N. SHEVTSOV
Russian Federation
References
1. Standard Test Method for Shear Properties of Composite Materials by the V-notched Beam Method, ASTM D5379-93, American Society for Testing and Materials, Philadelphia. (May 1993)
2. Tomblin J.S., Yeow C.N., Suresh K.R. Material Qualification and Equivalency for Polymer Matrix Composite Material Systems//U.S. Department of Transportation; Federal Aviation Administration. Final Report, DOT/FAA/AR-00/47, April 2001, 108 p.
3. Fereshteh-Saniee F., Majzoobi G.H., Bahrami M. An experimental study on the behavior of glass–epoxy composite at low strain rates//Journal of Materials Processing Technology. – 2005.-No.162–163.- p.39–45
4. Hurley D.C., Tewary V.K., Richards A.J. Surface acoustic wave methods to determine the anisotropic elastic properties of thin films//MEASUREMENT SCIENCE AND TECHNOLOGY. – 2001.- No.12.- p.1486–1494
5. Barthelat F., Espinosa H.D. ELASTIC PROPERTIES OF NACRE ARAGONITE TABLETS//Proceedings of the 2003 SEM Annual Conference and Exposition on Experimental and Applied Mechanics, June 2-4.- Charlotte, North Carolina.- Session 68.- Paper 187.- 2003.- p.6.
6. Buryan O.K., Novikov V.U. MODELING OF THE INTERPHASE OF POLYMER-MATRIX COMPOSITES: DETERMINATION OF ITS STRUCTURE AND MECHANICAL PROPERTIES//Mechanics of Composite Materials.- 2002.- Vol. 38, No. 3.- p.187-198
7. Kriz R.D., Farkas D., Batra R.C., Levensalor R.T., Parikh S.D. Combined Research and Curriculum Development of Web-based Educational Modules on Mechanical Behavior of Materials//Journal of Materials Education.- 2002.-Vol. 24 (1-3) - p. 41-52
8. Фудзии Т., Дзако М. Механика разрушения композиционных материалов/М.: Мир, 1982, 232 с.
9. Masters J. E., Portanova M. A. Standard Test Methods for Textile Composites//NASA Contractors Report 4751.- Lockheed Martin Engineering &Sciences Company.-82 p.
10. Jianmey He, Martin Y.M. Chiang et al. Application of the V-Notch Shear Test for Unidirectional Hybrid Composites//Journal of Composite Materials.-2002.- Vol. 36.- No. 23.- p.2653-2666
11. Neumeister J. M., Melin L.N. EXPERIMENTAL DETERMINATION OF IN-PLANE SHEAR PROPERTIES OF ANISOTROPIC COMPOSITE PANELS//J.Dept. of Solid Mechanics, KTH – Royal Institute of Technology.- 2003.-SE – 100 44.- Stockholm.- 8 p.
12. Ozes C., Demirsoy M. Stress analysis of pin-loaded woven-glass fiber reinforced epoxy laminate conveying chain components//Composite Structures. – 2005.-Vol. 69.- p.470–481
13. Tensile Properties of Polymer Matrix Composite Materials. ASTM D3039-95.- American Society for Testing and Materials, Philadelphia. (June 1995)
14. Новацкий В. Теория упругости/ М.:Мир, 1975.- 750 c.
15. Белоконь А.В., Наседкин А.В., Соловьев А.Н. Новые схемы конечно-элементного динамического анализа пьезоэлектрических устройств// ПММ 2002. - Т. 66.- № 3.- c. 491-501
16. Белоконь А.В., Бычков А.А., Васильченко К.Е., Надолин Д.К., Наседкин А.В., Соловьев А.Н. Разработка кластерной версии КЭ комплекса ACELAN// Параллельные вычисления в задачах математической физики. Сборник трудов всероссийской научно-технической конференции, 21-25 июня 2004, г. Ростов-на-Дону, изд-во РГУ.- 2004.- c. 24-35
Review
For citations:
BYCHKOV А., SOLOVIEV A., FOMIN A., PAHANYAN O., SHEVTSOV S. POLYMERIC COMPOSITE ELASTIC CONSTANTS DETERMINATION ON THE BASIS OF MODIFIED TECHNIQUE. THEORETICAL & NUMERICAL ANALYSIS. Vestnik of Don State Technical University. 2006;6(2):89-102. (In Russ.)
Views:
278
Email this article 