Safety case: cargo cranes

Introduction. Issues of ensuring safe operation of cranes due to changes in the legislative - regulatory system that allow for compromise solutions in case of deviations from the industrial safety requirements are considered. Materials and Methods. An example of safety risks under the crane operation taking into account the enactment of the Federal regulations to the extent of new requirements for safety zones is given. Survey data of the site operated with deviations from the industrial safety requirements are used under operation of the frame crane. The method of expert evaluation of the adverse event frequency is applied. It makes possible to develop recommendations for risk reduction. Research Results . In safety case of a hazardous industrial facility, reasonable safety management and engineering control (security barriers) are defined including data on the technological protection, blockings, and automatic protection systems. The employee qualification requirements for the safe operation of cranes are listed. Discussion and Conclusions . The results obtained are applicable to the facilities that operate cranes in order to reduce the accident risks. The safety rationale provides a clear understanding and an objective assessment of the possible accident risks and their consequences. Taking into account the data obtained, the actual working conditions can be optimized, and the problems of further safe operation can be solved.

грузоподъемные краны, обоснование безопасности, оценка риска, компенсирующие мероприятия, барьеры безопасности, системы видеонаблюдения, cargo cranes, safety analysis, risk assessment, remedial measures, security barriers, CCTV systems

1. O promyshlennoy bezopasnosti opasnykh proizvodstvennykh ob''ektov : feder. zakon: [utv. Prezidentom Rossiyskoy Federatsii 21 iyulya 1997 g. (red. ot 07.03.2017 g.)]. [On industrial safety of hazardous production facilities: Feder. law: [approved by President of the Russian Federation on July 21, 1997 (as amended on 07/03/2017)] Moscow: Research and Development Centre on Industrial Safety Problems, 2017, 56 p. (in Russian).

2. Korotkiy, А.А. Metodologicheskie osnovy otsenki, prognozirovaniya i upravleniya promyshlennoy bezopasnost'yu pod''emnykh sooruzheniy: avtoref. dis. … d-ra tekhn. nauk. [Methodological background for assessment, forecasting and management of industrial safety of lifting structures: Dr.Sci. (Eng.) diss., author’s abstract.] Novocherkassk, 1997, 37 p. (in Russian).

3. Kotelnikov, V.S. Metody diagnostiki i risk-analiza metallokonstruktsiy gruzopod''emnykh mashin v upravlenii ikh bezopasnost'yu: avtoref. dis. … d-ra tekhn. nauk. [Methods of diagnostics and risk-analysis of metal structures of load-lifting machines in their safety control: Dr.Sci. (Eng.) diss., author’s abstract.] Novocherkassk, 2006, 39 p. (in Russian).

4. Martynyuk, V.Y., et al. Analiz riska i ego normativnoe obespechenie. [Risk analysis and its regulatory support.] Occupational Safety in Industry, 1995, no. 11, pp. 55–62 (in Russian).

5. Kuzmin, I.I., Makhutov, N.A., Khetagurov, S.V. Bezopasnost' i risk. Ekologo-ekonomicheskie aspekty. [Safety and risk. Eco-economic aspects.] St.Petersburg: SPGUEF, 1997, 164 p. (in Russian).

6. Grazhdankin, A.I. K risk-orientirovannoy prombezopasnosti. [To risk-oriented industrial safety.] Production Quality Control, 2012, no. 7, pp. 18–23 (in Russian).

7. Kontseptsiya sovershenstvovaniya gosudarstvennoy politiki v oblasti obespecheniya promyshlennoy bezopasnosti s uchetom neobkhodimosti stimu-lirovaniya innovatsionnoy deyatel'nosti predpriyatiy na period do 2020 goda : [utv. resheniem Kollegii Federal'noy sluzhby po ekologicheskomu, tekhnologicheskomu i atomnomu nadzoru ot 26 sentyabrya 2011 g.] [Concept of improving state policy in the field of ensuring industrial safety with account for need to stimulate innovative activity of enterprises for the period up to 2020: [approved by decision of Federal Service for Environmental, Technological, and Nuclear Oversight Body of September 26, 2011.] Available at: http://www.consultant.ru/cons/cgi/online.cgi?req=doc;base=EXP;n=535787#0 (accessed: 01.06.17) (in Russian).

8. Obshchie trebovaniya k obosnovaniyu bezopasnosti opasnogo proizvodstvennogo ob''ekta: feder. normy i pravila v oblasti promyshlennoy bezopasnosti : [utv. Prikazom Rostekhnadzora № 306 ot 15 iyulya 2013 g.] [General requirements for safety case of hazardous production facility: Federal regulations on industrial safety: [approved by Order of Rostekhnadzor No. 306 of July 15, 2013.] Available at: http://www.consultant.ru/document/cons_doc_LAW_151251/ (accessed: 08.06.17) (in Russian).

9. Yegelskaya, E.V. Otsenka riska chelovecheskogo faktora v sisteme «personal — pod''emnye mekhanizmy — proizvodstvennaya sreda» na predpriyatiyakh mashinostroeniya: avtoref. dis. … kand. tekhn. nauk. [Assessment of human factor risk in the system of “personnel — lifting mechanisms — production environment” at enterprises of mechanical engineering: Cand.Sci. (Eng.) diss., author’s abstract.] Ростов-на-Дону, 2015. — 20 с. (in Russian).

10. Правила безопасности опасных производственных объектов, на которых используются подъемные сооружения: федер. нормы и правила в области промышленной безопасности : [утв. Приказом Ростехнадзора № 533 от 12 ноября 2013 г. (в ред. с изм. на 12.04.2016 г.) [Safety rules for hazardous production facilities on which lifting facilities are used: Federal regulations on industrial safety: [approved by Order of Rostekhnadzor No. 533 of November 12, 2013 (as amended on April 12, 2016).] Available at: http://www.consultant.ru/document/cons_doc_LAW_157709/ (accessed: 08.06.17) (in Russian).