ANALYSIS TECHNIQUE REFINEMENT OF SPINDLE HEAD VIBRATION OF MILLING AND DRILLING WOODWORKERS
Abstract
Various production methods are realized on the milling and drilling machines. A general approach to the model construction for the vibroacoustic dynamics of the oscillating system “spindle unit — cutting tool” is presented. On the pattern millers, boring and drilling are performed apart from the customary milling. Considering the design features and geometrics of the machining tool, linear and point sources are accepted as an acoustic radiator model. The modal test technology is based on the application of the differential equations of the bending vibrations of the distributed systems and A. N. Krylov’s functions. The analytic dependences for the vibration velocities considering process variables, design features of the tool and spindle units are obtained.
About the Authors
Valery Anatolyevich RomanovRussian Federation
Alexander Nikolayevich Chukarin
Russian Federation
Mikhail Bensionovich Flek
Russian Federation
References
1. Никифоров, А. С. Акустическое проектирование судовых конструкций / А. С. Ники-форов. — Ленинград : Судостроение, 1990. — 200 с.
2. Чукарин, А. Н. Теория и методы акустических расчётов и проектирования технологических машин для механической обработки. — Ростов-на-Дону : Изд. центр ДГТУ, 2005. — 152 с.
3. Расчёты на прочность в машиностроении / под ред. С. Д. Пономарёва. — Москва : Машгиз, 1959. — 884 с.
Review
For citations:
Romanov V.A., Chukarin A.N., Flek M.B. ANALYSIS TECHNIQUE REFINEMENT OF SPINDLE HEAD VIBRATION OF MILLING AND DRILLING WOODWORKERS. Vestnik of Don State Technical University. 2013;13(1-2):86-92. (In Russ.)