THEORETICAL RESEARCH ON VIBROACOUSTIC DYNAMICS UNDER BALL-AND-ROD HARDENING OF BAR- AND PLANE-TYPE PARTS
Abstract
The theoretical research on the noise emission process under the ball - and - rod hardening of the bar - and plane - type parts is considered. The analytic dependences of the produced noise spectra are obtained. That is th e basis for making the engineering de cisions on the bringing the acoustic characteristics to the sanitary norms at the design stage of such processes.
About the Authors
Andrey N. Leshchenko
Rostov State Transport University
Russian Federation
Russian Federation
Anatoly P. Babichev
Don State Technical University
Russian Federation
Russian Federation
References
1. Chukarin, A. N. Teoriya i metody` akusticheskix raschyotov i proektirovaniya texnologicheskix mashin dlya mexanicheskoj obrabotki: monografiya / A. N. Chukarin. — Rostov-na-Donu: Izd. centr DGTU, 2005. — 149 s. — In Russian.
2. Borisov, L. P. Zvukoizolyaciya v mashinostroenii / L. P. Borisov, D. R. Guzhas. — Moskva: Mashinostroenie, 1990. — 253, [1] s. — In Russian.
3. Raschyoty` na prochnost` v mashinostroenii. V 3 t. T. 1 / S. D. Ponomaryov [i dr.]. — Moskva: Mashgiz, 1956. — 884 s. — In Russian.
4. Spravochnik po sudovoj akustike / pod red. I. I. Klyukina, I. I. Bogolepova. — Leningrad: Sudostroenie, 1978. — 503 s. — In Russian.
Review
For citations:
Leshchenko A.N., Babichev A.P. THEORETICAL RESEARCH ON VIBROACOUSTIC DYNAMICS UNDER BALL-AND-ROD HARDENING OF BAR- AND PLANE-TYPE PARTS. Vestnik of Don State Technical University. 2012;12(1-2):77-82. (In Russ.)
Views:
409
Email this article 