DISASSEMBLY OF CONNECTING THREADS USING VIBROWAVE TECHNIQUE UNDER REPAIR AND UTILIZATION OF ENGINEERING PRODUCTS
Abstract
The possibility of the vibrowave impact application under the connecting threads disassembly is investigated. The specified operations go to make up a considerable amount of work in the repair and recycling of engineering products. It is essential to find the problem solution to restrict the environment pollution, to economize natural and material resources, energy, to shorten time and means in the production of new goods. Vibrowave loading is performed in the following manner. A solid iron rod – wave duct vibrates. These oscillations (15–50 Hz) stimulate the torque reduction under the connection disassembly. The torque reduction under processing similar water-cured connections with a variety of time intervals is considered. The obtained results are compared and analyzed. The data characterizing the interrelation between the working diagram of the vibrowave impact on the connection elements, target exposure time, and disassembly efficiency is offered.
About the Authors
Anatoly Prokofyevich Babichev
Don State Technical University.
Russian Federation
Russian Federation
Dieudonné Essola
Don State Technical University.
Russian Federation
Russian Federation
Sergey Nikolayevich Khudoley
Don State Technical University.
Russian Federation
Russian Federation
References
1. Karpunin, M.G., Lyubinetskiy, Y.G., Maydanchik, B.I. Zhiznennyy tsikl i effektivnost mashin. [Machine lifecycle and efficiency.] Moscow: Mashinostroyeniye, 1989, 312 p. (in Russian).
2. Babichev, A.P., Motrenko, P.D. Primeneniye vibratsionnykh tekhnologiy dlya povysheniya kachestva i ekspluatatsionnykh svoystv detaley. [Vibration technologies application for parts upgrading and service properties.] Rostov-on-Don: DSTU Publ. Centre, 2005, 215 p. (in Russian).
Review
For citations:
Babichev A.P., Essola D., Khudoley S.N. DISASSEMBLY OF CONNECTING THREADS USING VIBROWAVE TECHNIQUE UNDER REPAIR AND UTILIZATION OF ENGINEERING PRODUCTS. Vestnik of Don State Technical University. 2012;12(8):23-27. (In Russ.)
Views:
352
Email this article 