PROCESSING ACCURACY CONTROL USING CAPABILITIES OF MACHINE TOOL KNOWLEDGE SYSTEM
Abstract
The strategic approach to the development of the intellectual control systems of the machine tool accuracy as mechatronic technological systems is presented. It is based on the present-day ideas in the field of the error formation, processing accuracy control with the use of GKM capabilities and electronic manufacturing facilities documentation.
References
1. Reshetov D.N. Tochnost` metallorezhushhix stankov / D.N. Reshetov, V.T. Portman. – M.: Mashinostroenie, 1986. – 336 s. – In Russian.
2. Tugengol`d A.K. Intellektual`noe upravlenie mexatronny`mi texnologicheskimi sistemami / A.K. Tugengol`d, E.A. Luk`yanov. – Rostov n/D: Izdatel`skij centr DGTU, 2004. – 117 s. – In Russian.
3. Ratmirov V.A. Upravlenie stankami gibkix proizvodstvenny`x sistem / V.A. Ratmirov. – M.: Mashinostroenie, 1987. – 272 s. – In Russian.
4. Nevel`son M.S. Avtomaticheskoe upravlenie tochnost`yu metalloobrabotki / M.S. Nevel`son. – L.: Mashinostroenie, 1973. – 176 s. – In Russian.
5. Tochnost` proizvodstva v mashinostroenii i priborostroenii / pod red. A.N. Gavrilova. – M.: Mashinostroenie, 1973. – 567 s. – In Russian.
6. Dunin-Barkovskij I.V. Vzaimozamenyaemost` i texnicheskie izmereniya v mashinostroenii / I.V. Dunin-Barkovskij, A.N. Zhuravlyov, V.P. Korotkov. – M.: Mashinostroenie, 1972. – 615 s. – In Russian.
7. MI 2232-2000. Obespechenie e`ffektivnosti izmerenij pri upravlenii texnologicheskimi processami. Ocenivanie pogreshnosti izmerenij pri ogranichennoj isxodnoj informacii. – In Russian.
8. GOST 8.009-84. Gosudarstvennaya sistema obespecheniya edinstva izmerenij. Normiruemy`e metrologicheskie xarakteristiki sredstv izmereniya. – In Russian.
9. MI 1317-2004 GSI. Rezul`taty` i xarakteristiki pogreshnosti izmerenij. Normy` predstavleniya. Sposoby` ispol`zovaniya pri ispy`taniyax obrazczov produkcii i kontrole ix parametrov. – In Russian.
10. Tugengol`d A.K. Ocenka situacii i prinyatie reshenij intellektual`noj sistemoj upravleniya texnologicheskim ob``ektom / A.K. Tugengol`d // Vestn. Donsk. gos. texn. un-ta. – 2010. – T. 10, #6. – S. 860–867. – In Russian.
11. Intellektual`ny`e sistemy` v upravlenii proizvodstvenny`mi i texnologicheskimi processami / A.K. Tugengol`d, I.V. Boguslavskij, E.A. Luk`yanov [i dr.]; pod red. A.K. Tugengol`da. – Rostov n/D: Izdatel`skij centr DGTU, 2010. – 182 s. – In Russian.
Review
For citations:
Tugengold A.K. PROCESSING ACCURACY CONTROL USING CAPABILITIES OF MACHINE TOOL KNOWLEDGE SYSTEM. Vestnik of Don State Technical University. 2011;11(8-1):1201-1209. (In Russ.)
Views:
344
Email this article 