Modeling of quality characteristics of the surface layer hardened by free-moving indenters under rotating electromagnetic field

It is shown that the magnetodynamic treatment implemented under the conditions of a rotating electromagnetic field is a kind of the dynamic methods of hardening free-moving indenters by the convection flows. It is proposed to use analytic dependences obtained by the approximation of the test data of effect of the surface plastic deformation (SPD) dynamic methods on the component hardened layer quality to evaluate quality parameters of the surface layer formed under the magnetodynamic processing. The resulting expression describing the experimentally established fact that the main contribution to the formation of the quality parameters of the hardened layer is made by the initial continuous coating of the treated surface with plastic prints is obtained. An analytical functional model establishing the surface layer quality parameters behavior depending on the multiplicity of covering the surface by the shock-pulse impact of the free-moving indenters is proposed. A comparative analysis of the experimental data obtained in the process of the magneto-dynamic processing with the calculated ones shows the applicability of the proposed models for predicting quality parameters of the hardened surface layer.

магнитодинамическая обработка, упрочнение, параметры качества поверхности, свободнодвижущиеся инденторы, поверхностное пластическое деформирование, magnetodynamic treatment, hardening, parameters of surface quality, free-moving indenters, surface plastic deformation

1. Lebedev, V.A. Tekhnologiya dinamicheskih metodov poverhnostnogo plasticheskogo deformirovaniya. [Technology of dynamic methods of surface plastic deformation.] Rostov-on-Don, 2006, 183 p. (in Russian).

2. Kochubey, A.A., Lebedev, V.A. Primenenie vraschayuschegosya elektromagnitnogo polya v tehnologicheskih tselyah. [Application of rotating electromagnetic field for technological purposes.] Integrirovannyie vibrovolnovyie tehnologii v mashinostroenii, metalloobrabotke: sb. tr. po materialam mezhdunar. nauch. simp. tehnologov-mashinostroiteley. [Integrated vibrowave technologies in mechanical engineering, metal working: Proc. Int. Sci. Symp. of mechanical engineerstechnologists.] Rostov-on-Don, 2015, pp. 210–217 (in Russian).

3. Kochubey, A.A., Lebedev, V.A. Effektivnost primeneniya vraschayuschegosya elektromagnitnogo polya dlya otdelochno-uprochnyayuschey obrabotki detaley letatelnyih apparatov. [Efficiency of the rotating electromagnetic field application for finishing and hardening of aircraft components.] Aerokosmicheskaya tehnika, vyisokie tehnologii i innovatsii: sb. st. po materialam XVI vserossiyskoy nauch.- tehn. konf. [Aerospace engineering, high technologies and innovations: Proc. XVI All-Russian Sci.-Tech. Conf.] Perm, 2015, pp. 175–178 (in Russian).

4. Lebedev, V.A., Kochubey, A.A. Otdelochno-uprochnyayuschaya obrabotka detaley svobodnodvizhuschimisya indentorami v usloviyah vraschayuschegosya elektromagnitnogo polya. [Finishing-strengthening treatment of parts by free indenters under the rotating electromagnetic field conditions.] Aspektyi razvitiya nauki, obrazovaniya i modernizatsii promyishlennosti: materialyi XIII region. nauch.-prakt. konf. uchrezhdeniy vyissh. i sred. prof. obrazovaniya [Aspects of the development of science, education and industry modernization: Proc. XIII Region. Sci.-Pract. Conf. of higher and secondary vocational education institutions.] Taganrog, 2015, pp. 245–247 (in Russian).

5. Babichev, A.P., Babichev, I.A. Osnovyi vibratsionnoy tehnologii. [Basics of vibration technology.] Rostov-on-Don: DSTU Publ. Centre, 2008, 694 p. (in Russian).

6. Kopylov, Y.R. Vibroudarnoe uprochnenie. [Shock-vibrating hardening.] Voronezh Institute of RF MIA Press, 1999, 386 p. (in Russian).

7. Tamarkin, M. A. Tehnologicheskie osnovyi obrabotki detaley PPD v granulirovannyih rabochih sredah. [Processing techniques of DCA components in granular environments.] Naukoemkie tehnologii v mashinostroenii i aviastroenii: Materialyi IV mezhdunar. nauch.-tehn. konf. [High technologies in mechanical engineering and aviation industry: Proc. IV Int. Sci.-Tech. Conf.] Rybinsk, 2012, pp. 24–32 (in Russian).

8. Shvedova, A.S. Vozdeystvie vibratsionnoy otdelochno-uprochnyayuschey obrabotki na uvelichenie zhiznennogo tsikla detaley mashin. [Exposure to vibration finishing and strengthening treatment to increase the life cycle of machine parts.] Innovatsii, kachestvo i servis v tehnike i tehnologiyah: sb. nauch. trudov po mat. 4-oy mezhdunar. nauch.-prakt. konf. v 3 t. [Innovation, quality and service in engineering and technology: Coll. of sci. papers on 4-th Int. Sci.-Pract. Conf. in 3vol.] Kursk, 2014, vol. 2, pp. 265–268 (in Russian).

9. Lebedev, V.A. Energeticheskie aspektyi uprochneniya detaley dinamicheskimi metodami poverhnostnogo plasticheskogo deformirovaniya. [Energy aspects of hardening parts by dynamic methods of surface plastic deformation.] Rostov-on-Don: DSTU Publ. Centre, 2007, 158 p. (in Russian).

10. Lebedev, V.A. Suschnost i zakonomernosti dinamiki protsessa obrabotki ferromagnitnyimi granulirovannyimi sredami vo vraschayuschemsya elektromagnitnom pole. [Essence and regularities of dynamics of processing the ferromagnetic granulated environments in the rotating electromagnetic field.] Progressivnyie tehnologii i sistemyi mashinostroeniya, 2016, no. 1, pp. 84–91 (in Russian).

11. Babichev, A.P., et al. Teoriya veroyatnosti v reshenii tehnologicheskih zadach (na primere vibratsionnoy obrabotki v granulirovannyih sredah). [Probability theory in solving technological problems (case of the vibration treatment in granular media).] Rostov-on-Don: DSTU Publ. Centre, 2013, 126 p. (in Russian).