Design model of heavy-duty radial bearing running on micropolar grease with account of its viscosity-temperature characteristics
https://doi.org/10.12737/23784
Abstract
The study objective is to develop a method for calculating the plain journal bearing with an adapted profile of the bearing surface operating on the micropolar lubrication. Furthermore, it is assumed that the micropolar fluid viscosity characteristics are temperature dependent. Partial filling of the front gap with lubricant (i.e. availability of a free surface) is considered. Except regular dimensionless parameters of Newtonian fluid theory, other options for micropolar liquid are introduced, namely the interaction of N and N1 parameters characterizing the dependence on the size of the grease molecules. The numerical analysis shows that with the heat parameter ( К ) increment, the carrying capacity of the bearing decreases. With the increment of the parameters and characterizing the adapted profile of the bearing surface, the bearing capacity increases. At the parameter point of =0.5, maximum load capacity is achieved. At the bearing capacity value tends to the corresponding value for the case of Newtonian lubricant
About the Authors
Kamill S. Akhverdiev
Rostov State Transport University
Russian Federation
Russian Federation
Elena O. Lagunova
Rostov State Transport University
Russian Federation
Russian Federation
Konstantin S. Solop
Rostov State Transport University
Russian Federation
Russian Federation
References
1. Mukutadze, М.А. Matematicheskaya model' szhimaemoy mikropolyarnoy gidrodinamicheskoy smazki radial'nogo podshipnika s adaptirovannym profilem ego opornoy poverkhnosti. [Mathematical model of compressible micropolar hydrodynamic lubrication for radial bearing with adapted profile of its surface.] Vestnik of DSTU, 2011, vol. 11, no. 8 (59), pp. 1400–1404 (in Russian).
2. Akhverdiev, K.S., et al. Matematicheskaya model' gidrodinamicheskoy smazki radial'nogo podshipnika, rabotayushchego v nestatsionarnom rezhime na mikropolyarnoy smazke. [Mathematical model of hydrodynamic lubrication for radial bearing operating in an unsteady mode on micropolar lubrication.] Vestnik RGUPS, 2008, no. 1 (29), pp. 147–151 (in Russian).
3. Akhverdiev, K.S., et al. Gidrodinamicheskiy raschet radial'nogo podshipnika, rabotayushchego v nestatsionarnom rezhime na vyazkoplastichnoy smazke, obladayushchey mikropolyarnymi svoystvami. [The hydrodynamic calculation of radial bearing operating in nonstationary conditions with viscous-plastic lubricant having micropolar properties.] Vestnik RGUPS, 2008, no. 4 (32), pp. 131–138 (in Russian).
4. Akhverdiev, K.S., et al. Analiticheskiy metod prognozirovaniya znacheniy kriteriev mikropolyarnoy smazki, obespechivayushchikh ustoychivyy rezhim raboty radial'nogo podshipnika skol'zheniya. [Analytical method for prognosis of values of micropolar lubrication criteria providing stable operation of radial sliding bearing.] Friction and Wear, 2008, vol. 29, no. 2, pp. 184–191 (in Russian).
5. Akhverdiev, K.S., et al. Matematicheskaya model' mikropolyarnoy smazki podshipnikov skol'zheniya s podatlivoy opornoy poverkhnost'yu. [Mathematical model of micropolar greasing of bearings of sliding with a pliable basic surface.] Friction & Lubrication in Machines and Mechanisms, 2012, no. 6, pp. 22–25 (in Russian).
6. Vovk, А.Y., Mukutadze, М.А., Savenkova, M.A. Matematicheskaya model' prognozirovaniya znacheniy bezrazmernykh kriteriev mikropolyarnoy smazki, obespechivayushchikh ratsional'nyy rezhim raboty radial'nogo podshipnika skol'zheniya. [Mathematical model for predicting values of dimensionless criteria of micropolar lubrication ensuring rational operation of the radial plain bearing.] Vestnik RGUPS, 2007, no. 1 (25), pp. 5–8 (in Russian).
7. Akhverdiev, K.S., et al. Raschetnaya model' radial'nogo podshipnika skol'zheniya s povyshennoy nesushchey sposobnost'yu, rabotayushchego na mikropolyarnoy smazke s uchetom ee vyazkostnykh kharakteristik ot davleniya. [Сomputational model of the radial plain bearing with high load carrying capacity operating at micropolar grease with account of its viscous characteristics from pressure.] Engineering Journal of Don, 2013, no. 4. Available at: http://ivdon.ru/magazine/archive/n4y2013/2200 (accessed: 20.11.14) (in Russian).
8. Akhverdiev, K.S., et al. Raschetnaya model' upornogo podshipnika skol'zheniya s povyshennoy nesushchey sposobnost'yu, rabotayushchego na nen'yutonovskikh smazochnykh materialakh s adaptirovannoy opornoy poverkhnost'yu. [Computational model of thrust sliding bearing with high load-bearing capacity operating on non- Newtonian lubricants with adapted supporting surface.] Engineering Journal of Don, 2013, no. 4. Available at: http://ivdon.ru/magazine/archive/n4y2013/2201 (accessed: 20.11.14) (in Russian).
9. Akhverdiev, K.S., Mukutadze, M.A., Erkenov, A.C. Razrabotka raschetnykh modeley podshipnikov skol'zheniya na osnove usovershenstvovaniya uprugodinamicheskoy teorii smazki. [Development of computational models of plain bearings on the basis of improving elastic dynamical theory of lubrication.] Rostov-on-Don: RSTU Press, 2012, 371 p. (in Russian).
10. Mukutadze, M.A. Razrabotka sistemy raschetnykh modeley podshipnikov skol'zheniya na osnove razvitiya gidrodinamicheskoy i reodinamicheskoy teorii smazki: dis. … d-ra tekhn. nauk. [Development of calculation models system of sliding bearings on the basis of the hydrodynamic lubrication theory and rheodynamic theory of lubrication: Dr.Sci. (Engs.) diss.] Rostov-on-Don: RSTU, 2015, 476 p. (in Russian).
11. Lagunova, Е.О.,Cherkasova, T.S., Mukutadze, M.A. Raschetnaya model' s uchetom zavisimosti vyazkosti ot davleniya radial'nogo podshipnika, obladayushchego povyshennoy nesushchey sposobnost'yu. [Computational model with account of dependence of viscosity on the radial bearing pressure which has higher load-bearing capacity.] Tr. Mezhdunar. nauch.-prakt. konf. «Transport-2014». Ch. III. Tekhnicheskie i estestvennye nauki. [Proc. Int. Sci.-Pract. Conf. “Transport-2014”. Part III. Engineering and Science] St. Petersburg, 2014, pp. 218–220 (in Russian).
Review
For citations:
Akhverdiev K.S., Lagunova E.O., Solop K.S. Design model of heavy-duty radial bearing running on micropolar grease with account of its viscosity-temperature characteristics. Vestnik of Don State Technical University. 2016;16(4):110-117. (In Russ.) https://doi.org/10.12737/23784
Views:
334
Email this article 