DYNAMIC MODEL OF THE TEST BENCH FOR HELICOPTER VANES LONGERONS
Abstract
The dynamic model of the test bench for helicopter vanes longerons are described and studied in the paper. Model was developed to determining a vibration level, which pass to ambient space. The global aim of presented work - to optimize the vibroprotection of dynamic test bench.
About the Authors
I.V. BOGDANOVA
Don State Technical University.
Russian Federation
Russian Federation
А.D. LUKJANOV
Don State Technical University.
Russian Federation
Russian Federation
S.А. SHAMSHURA
Russian Federation
References
1. Программа испытаний лопасти несущего винта. -М.: ОАО МВЗ им. Миля, 2002. -25 с.
2. ГОСТ ССБТ 12.1.034-90 "Вибрация. Общие требования к проведению измерений".
3. ГОСТ ССБТ 12.1.043-90 "Вибрация. Методы измерений на рабочих местах в производственных помещениях
4. ГОСТ ССБТ 12.1.043-90. "Вибрация локальная. Методы измерений".
5. СН 2.2.4/2.1.8562-96
6. Дж.К.Лич. Классическая механика.. -М.: Изд-во иностранной литературы, 1961. -173 с.
Review
For citations:
BOGDANOVA I., LUKJANOV А., SHAMSHURA S. DYNAMIC MODEL OF THE TEST BENCH FOR HELICOPTER VANES LONGERONS. Vestnik of Don State Technical University. 2007;7(2):209-217. (In Russ.)
Views:
289
Email this article 