Reliability control of final vibration strengthening of part processing in steel balls medium

Introduction. The research results of the vibration part processing in the steel balls medium are provided. Technological capabilities of the treatment are identified. The concept of process reliability is considered. Factors affecting the output parameters of a (process) control object from the point of view of its reliability, and indicators for estimating the process reliability are determined. Materials and Methods. As an object for the reliability research, the vibration finishing-strengthening processing in the steel balls medium is selected. This process can be performed on the part hardening and finishing operations, peening, and coating (galvanic, paint, rubber, adhesive, etc.) preparation of parts. Samples from various materials applied in machine industry and instrument-making are used. Research Results. A set of models for forming process reliability indices that allow providing increase in efficiency and reaching the specified value and stability of quality parameters of the processed part is obtained. Dependences for the determination of arithmetic average surface roughness, hardening depth, deformation ratio, and cutting time, are determined. A set of pilot studies which results confirm adequacy of the theoretical dependences is carried out. Discussions and Conclusions. A set of the obtained models can help to calculate the accuracy factor value at the stage of process design that will allow predicting reliability of the process accepted for production.

вибрационная отделочно-упрочняющая обработка деталей, надежность технологического процесса, шероховатость поверхности, глубина упрочнения, степень деформации, время обработки, final vibration strengthening part processing, process reliability, surface roughness, hardening depth, deformation ratio, processing time

1. Korolkov, Y.V. Povyshenie nadezhnosti tekhnologicheskogo protsessa tsentrobezhno-rotatsionnoy obrabotki v srede abraziva: dis. … kand. tekhn. nauk. [Increase in reliability of centrifugal-rotary processing in abrasive environment: Cand.Sci. (Eng.) diss.] Rostov-on-Don, 2011, 167 p. (in Russian).

2. GOST 27.202-83. Nadezhnost' v tekhnike. Tekhnologicheskie sistemy. Tekhniche-skie trebovaniya k metodam otsenki nadezhnosti po parametram proizvoditel'nosti. [GOST 27.202-83. Reliability in technique. Technological systems. Methods of reliability evaluation by parameters of product quality.] USSR State Standards Committee. Moscow: Standartinform, 51 p. (in Russian).

3. Ryzhkin, А.А., Slyusar, B.N., Shuchev, K.G. Osnovy teorii nadezhnosti. [Reliability theory fundamentals.] Rostov- on-Don: DSTU Publ. Centre, 2002, 182 p. (in Russian).

4. Androsov, А.А. Nadezhnost' tekhnicheskikh sistem. [Reliability of engineering systems.] Rostov-on-Don: DSTU Publ. Centre, 2000, 169 p. (in Russian).

5. Drozd, M.S., Matlin, M.M., Sidyakin, Y.I. Inzhenernye raschety uprugoplasticheskoy kontaktnoy deformatsii. [Engineering analysis of elastoplastic contact deformation.] Moscow: Mashinostroenie, 1986, 224 p. (in Russian).

6. Boutreaux, T., et al. Propagation of a pressure step in a granular material: The role of wall friction. Physical Review E. 1997, vol. 55, no. 5b, pp. 57–59.

7. Jaeger, M., Nagel, S.-R., Behringer, R.-P. Granular solids, liquids, and gases. Reviews of Modern Physics, 1996, vol. 68, pp. 1259–1273.

8. Yokomithi, I., et al. Impact Damper with Granular Materials for Multibody System. Journal of Pressure Vessel Technology, 1996, vol. 11, pp. 160–166.

9. Tamarkin, М.А., Tishchenko, E.E., Lebedenko, V.G. Povyshenie kachestva poverkhnostnogo sloya detaley pri obrabotke poverkhnostnym plasticheskim deformirovaniem v gibkikh granulirovannykh sredakh. [Improvement of quality of the blanket of details at processing by superficial plastic deformation in the flexible granulated environments.] Vestnik of DSTU, 2009, vol. 9, no. 3, pp. 213–223 (in Russian).

10. Tamarkin, M.A., Tishchenko, E.E., Lebedenko, V.G. Surface-layer quality in shot treatment. Russian Engineering Research, 2010, vol. 30, no. 2, pp. 144–148.

11. Sidyakin, Y.I. Razrabotka metodov rascheta uprugoplasticheskikh kontaktnykh deformatsiy v protsessakh uprochneniya detaley poverkhnostnym plasticheskim deformirovaniem : avtoref. … dis. dokt. tekhn. nauk. [Development of methods for calculating elastoplastic contact deformations in processes of parts hardening by surface plastic deformation: Dr.Sci. (Eng.) diss., author’s abstract.] Moscow, 2002, 34 p. (in Russian).