On a special case of synthesis of metal turning process control system

Introduction . One of the widely accepted methods of the precision metal turning provided a fairly complex shape of the workpiece is the method of multiple repetitions of turning. The principle of this method is cutting an extra thin layer of the work material. At that, the required operating depth is obtained through the successive passes of the cutting tool along the workpiece. An essential fault of this method of complex parts processing is low efficiency due to the long processing time. Materials and Methods . The improvement of efficiency is possible through the introduction of new modern methods of the treatment process control. Modern approaches to the analysis and synthesis of the control systems of complex operating procedures based on the development of the synergetic concept of management could be used as such methods. A special feature of this approach is the identification and control of the inherent feedbacks stabilizing the treatment process. On the basis of the analysis conducted, the control that is a new nonlinear degenerative feedback is synthesized. Its task is to assure adequate quality and efficiency of the processing under the asymptotic stability of the required attractors. Research Results . A fundamentally new mathematical model considering non-linear processes of the force changes is developed to simulate the system and allowance for the effect of the engine parameters. The analysis of the dynamics of the metal turning control system with the evaluation of the process quality is carried out. A synergistic approach to the construction of the optimal production control system considering the interconnectivity of the actuators providing the workpiece rotation and supply is used. The analysis of the synthesized system dynamics with the comparative evaluation of the quality growth is conducted. Discussion and Conclusions . The synthesized synergetic control law changes fundamentally the properties of the metal turning control system. A comparative analysis of the obtained dependences allows observing a substantial increase in the processing accuracy. At that, a synthesized system control asymptotically approaches the deviation of the allowance to the value specified as one of the constants on the control channel of the feed velocity.

процесс резания, система управления, синергетический синтез, подача, жесткость заготовки, cutting process, control system, synergetic synthesis, feed, workpiece stiffness

1. 1. Lapshin, V.P., Tyunyaev, R.A., Khristoforova, V.V. Otsenka vliyaniya skorosti podachi, na ravnovesnye rezhimy privoda obespechivayushchego frezerovanie zagotovki peremennoy tolshchiny. [Assessing impact of feed rate on equilibrium drive mode providing tapered workpiece milling.] Dinamika tekhnicheskikh system: sb. trudov 12- y mezhdunar. nauchno-tekhn. konf. [Dynamics of technical systems: Proc. 12th Int. Sci.-Tech. Conf.] Rostov-on-Don, 2016, pp. 180–184 (in Russian).

2. Zakovorotny, V.L., Lukyanov, A.D. The Problems of Control of the Evolution of the Dynamic System Interacting with the Medium. International Journal of Mechanical Engineering and Automation, 2014, vol. 1, no. 5, pp. 271–285.

3. Anh, N.D., Zakovorotny, V.L., Hao, D.N. Van der Pol-Duffing oscillator under combined harmonic and random excitations. Vietnam Journal of Mechanics, 2014, vol. 36, no. 3, pp. 161-172.

4. Zakovorotny, V.L., Lukyanov, A.D., Gubanova, A.A., Hristoforova, V.V. Bifurcation of stationary manifolds formed in the neighborhood of the equilibrium in a dynamic system of cutting. Journal of Sound and Vibration, 2016, vol. 368, pp. 174-190.

5. Zakovorotny, V.L., Lukyanov, A.D. Parametric phenomena in processing control on machine-tools. 6th International Scientific Conference “Applied Sciences and Technologies in the United States and Europe: Common Challenges and Scientific Findings”, 2014, pp. 113-118.

6. Lapshin, V.P., Turkin, I.A. Dynamic influence of the spindle servo drive on the drilling of deep narrow holes. Russian Engineering Research, 2015, vol. 35, no. 10, pp. 795-797.

7. Kolesnikov, А.А. Sovremennaya prikladnaya teoriya upravleniya: sinergeticheskiy podkhod v teorii upravleniya. [Modern management applied theory: synergistic approach to control theory.] Taganrog: TSRU Publ. House, 2000, 68 p. (in Russian).

8. Kolesnikov, А.А., ed. Sinergetika i problemy teorii upravleniya. [Synergetics and problems of control theory.] Moscow: Fizmatlit, 2004, 504 p. (in Russian).

9. Zakovorotny, V.L., Lapshin, V.P., Turkin, I.A. Upravlenie protsessom sverleniya glubokikh otverstiy spiral'nymi sverlami na osnove sinergeticheskogo podkhoda. [Process control drilling deep holes twist drills based on the synergetic approach.] University News. North-Caucasian region. Technical Sciences Series, 2014, no. 3 (178), pp. 33–41. (in Russian).

10. Lapshin, V.P., Turkin, I.A. Vliyanie svoystv servoprivoda shpindelya na dinamiku sverleniya glubokikh otverstiy malogo diametra. [Effect of spindle servo drive properties on drilling dynamics of deep pinholes.] Vestnik of DSTU, 2013, no. 5–6(74), pp.125–130 (in Russian).