Preview

Advanced Engineering Research (Rostov-on-Don)

Advanced search

INFORMATION MODEL OF MANUFACTURING AND TECHNOLOGICAL SOLUTION FOR PROCESS CONTROL SYSTEM OF MULTIPART PRODUCTION

Abstract

The efficiency improvement necessity of the technological process design for the multiproduct manufacture is proved. The information model of the liberal manufacturing and technological solution based on the standard technological systems application at the pre-production stages is offered and considered. The design method and the technology model structure providing a flexible synthesis of its elements at various stages of the production process are resulted. The virtual manufacturing operations application is proposed as system elements. Their compliance with intra- and interdepartmental operational order is considered. Particular focus is on the production planning phase, and on the necessity of the standard technological systems application for its speedup. Further technology system refinement is referred to the stages of planning and production where the workplaces are finally allocated for the operations. It is stated that the integration with the technical systems using rendition code tables is necessary. A special type of the manufacturing operation is selected for spoilage probability cases and for the process operations recurrence.

About the Author

Konstantin Vladimirovich Bashlayev
Don State Technical University. Russia
Russian Federation


References

1. Иванов, И. Н. Организация производства на промышленных предприятиях : учеб. пособие / И. Н. Иванов. — Москва : ИНФРА, 2008. — 352 с.

2. Долгов, В. А. Информационная модель технологического процесса в современных системах управления производством / В. А. Долгов // Автоматизация и современные технологии. — 2008. — № 9. — С. 36—38.


Review

For citations:


Bashlayev K.V. INFORMATION MODEL OF MANUFACTURING AND TECHNOLOGICAL SOLUTION FOR PROCESS CONTROL SYSTEM OF MULTIPART PRODUCTION. Vestnik of Don State Technical University. 2013;13(1-2):58-61. (In Russ.)

Views: 323


Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 License.


ISSN 2687-1653 (Online)