APPLICATION OF VIBROWAVE IMPACT (VIBRATIONS) IN DISASSEMBLING FIXED DEMOUNTABLE JOINTS UNDER RESTORATION AND RECLAMATION OF ENGINEERING PRODUCTS
Abstract
Some problems on disassembling fixed demountable joints by oscillations forced by the waveguide are considered. The obtained results of the study characterizing the relationship between the used scheme of the vibro-loading, the target exposure period, and the disassembly efficiency are shown.
About the Authors
Anatoly P. Babichev
Don State Technical University.
Russian Federation
Russian Federation
Dieudonné Essola
Don State Technical University.
Russian Federation
Russian Federation
Ekaterina N. Kovalenko
Don State Technical University.
Russian Federation
Russian Federation
Nikolay S. Koval
Don State Technical University.
Russian Federation
Russian Federation
Boris A. Goncharov
Don State Technical University.
Russian Federation
Russian Federation
References
1. Shtrikov B.L. Povy`shenie e`ffektivnosti sborki soedinenij putyom primeneniya ul`trazvuka na baze kompleksny`x teoreticheskix i e`ksperimental`ny`x issledovanij fizicheskogo mexanizma processa i ego texnologicheskix pokazatelej: avtoref. dis. … d-ra texn. nauk. – Samara, 1994. – 33 s. – In Russian.
Review
For citations:
Babichev A.P., Essola D., Kovalenko E.N., Koval N.S., Goncharov B.A. APPLICATION OF VIBROWAVE IMPACT (VIBRATIONS) IN DISASSEMBLING FIXED DEMOUNTABLE JOINTS UNDER RESTORATION AND RECLAMATION OF ENGINEERING PRODUCTS. Vestnik of Don State Technical University. 2012;12(1-1):50-55. (In Russ.)
Views:
464
Email this article 