HOT WELD METAL GRINDING WITH SOFT AND MEDIUM-SOFT WHEELS
Abstract
The hot weld metal grinding of the cylindrical parts with soft and medium-soft wheels is investigated. Work-time wheel wear charts and grinding cutting force diagrams received through the test and calculation data are offered. Applicable equations for the cutting forces occurring in the wheel — workpiece interaction, depending on the grinding conditions through the hot weld metal grinding of the barrels with the soft and medium-soft wheels at the welding arc burn-out and cutter withdrawal moment, are developed.
About the Authors
Nikolay I. Boyko
Rostov State Transport University.
Russian Federation
Russian Federation
Konstantin S. Fisenko
Rostov State Transport University.
Russian Federation
Russian Federation
References
1. Korchak S.N. Povy`shenie proizvoditel`nosti shlifovaniya. (Vy`bor xarakteristiki krugov i primenenie izotopov dlya opredeleniya ix zasalivaemosti) / S.N. Korchak. – Chelyabinsk: Kn. izd-vo, 1961. – 68 s. – In Russian.
2. Bojko N.I. Resursosberegayushhie texnologii povy`sheniya kachestva poverxnostny`x sloyov detalej mashin / N.I. Bojko. – M.: Marshrut, 2006. – 200 s. – In Russian.
3. Bojko N.I. Povy`shenie e`ffektivnosti mexanicheskoj obrabotki naplavlennogo metalla za schyot tepla, generiruemogo svarochnoj dugoj: dis. … d-ra texn. nauk. – Samara, 1991. – 407 s. – In Russian.
4. Mucyanko V.I. Osnovy` vy`bora shlifoval`ny`x krugov i podgotovka ix k e`kspluatacii / V.I. Mucyanko; pod red. L.N. Filimonova. – 3-e izd., pererab. i dop. – L.: Mashinostroenie. Leningr. otd-nie, 1987. – 134 s. – In Russian.
5. Naerman M.S. Rukovodstvo dlya podgotovki shlifovshhikov: ucheb. posobie dlya PTU / M.S. Naerman, Ya.M. Naerman. – M.: Vy`ssh. shk., 1989. – 279 s. – In Russian.
6. Kudasov G.F. Abrazivny`e materialy` i instrumenty` / G.F. Kudasov. – 3-e izd., pererab. i dop. – L.: Mashinostroenie. Leningr. otd-nie, 1967. – 160 s. – In Russian.
7. Maslov E.N. Teoriya shlifovaniya metallov / E.N. Maslov. – M.: Mashinostroenie, 1974. – 320 s. – In Russian.
8. Danko P.E. Vy`sshaya matematika v uprazhneniyax i zadachax. Ch. 3 / P.E. Danko, A.G. Po-pov. – M.: Vy`ssh. shk., 1971. – 287 s. – In Russian.
Review
For citations:
Boyko N.I., Fisenko K.S. HOT WELD METAL GRINDING WITH SOFT AND MEDIUM-SOFT WHEELS. Vestnik of Don State Technical University. 2012;12(1-1):86-94. (In Russ.)
Views:
461
Email this article 