Abrasive processing mechanization of parts from polymeric composite materials for paste operation

Introduction. The development of the final abrasive processing of parts from polymeric composite materials with the use of the flexible grinding tool is considered. The research objective is to reduce the processing time through displacement of human labour by mechanized work, as well as to improve the treated surface quality.

Materials and Methods. The method of surface preparation of parts made of polymeric composite materials (PCM) is used for gluing through the mechanical abrasive treatment with a flexible grinding tool.

Research Results. Characteristic features of forming the surface microprofile of GRP parts after treatment with a flexible abrasive tool by hand and mechanical methods are analyzed. Need for mechanization of the given operation is determined and validated. The surface parameters affecting the formation of a quality adhesive bond are described. The design features of a flexible grinding tool and their effect on the formation of surface roughness are considered. Data of the surface microprofile treated by a grit cloth and a flap wheel under various cutting conditions are compared.

Discussion and Conclusions. Mechanical processing by flap wheels can replace manual sanding of parts made of polymeric composite materials, drastically reduce the operation time, and improve quality rating of the part surfaces for pasting 

1. Sirotkin, O.S., Grishin, V.I., Litvinov, V.B. Proektirovanie, raschet i tekhnologiya soedineniya v aviatsionnoy tekhnike. [Design, calculation and technology of connection in aeronautical engineering.] Moscow: Mashinostroenie, 2006, 452 p. (in Russian).

2. Vilnav, Zh.-Zh. Kleevye soedineniya. [Adhesive assemblies]. Moscow: Tekhnosfera, 2007, 384 p. (in Russian).

3. Benson, A.-F. Adhesives advance assembly. Assembly, 1991, September, pp. 12–15.

4. Karlsson, Н. Quality Assurance in Adhesive Joining Technology. Assembly Automation, 1997, vol. 17, no. 1, pp. 48–55.

5. Mezhgosudarstvennyy standart. Shkurka shlifoval'naya tkanevaya vodostoykaya. Tekhnicheskie usloviya: GOST 13344-79. [Interstate Standard. Waterproof abrasive cloth. Specifications: GOST 13344-79.] USSR Ministry of Machine-Tool and Toolmaking Industry. Moscow: IPK Izdatel'stvo standartov, July 2003, 6 p. (in Russian).

6. Mezhgosudarstvennyy standart. Shkurka shlifoval'naya tkanevaya i bumazhnaya. Tekhnicheskie usloviya: GOST 5009-82. [Interstate Standard. Abrasive cloth. Specifications: GOST 5009-82.] USSR Ministry of Machine-Tool and Toolmaking Industry. Moscow: IPK Izdatel'stvo standartov, November 2001, 10 p. (in Russian).

7. Mezhgosudarstvennyy standart. Shkurka shlifoval'naya bumazhnaya vodostoykaya. Tekhnicheskie usloviya: GOST 10054-82. [Interstate Standard. Waterproof abrasive paper. Specifications: GOST 10054-82.] USSR Ministry of Machine-Tool and Toolmaking Industry. Moscow: IPK Izdatel'stvo standartov, June 1990, 34 p. (in Russian).

8. Shchegolev, V.A., Ulanova, M.E. Elastichnye abrazivnye i almaznye instrumenty (teoriya, konstruktsiya, primenenie). [Elastic abrasive and diamond tools (theory, design, application).] Leningrad: Mashinostroenie, 1977, 184 p. (in Russian).

9. Gdalevich, A.I. Finishnaya obrabotka lepestkovymi krugami. [Finishing with flap wheels.] Moscow: Mashinostroenie, 1990, 112 p. (in Russian).

10. Dimov, Yu.V. Obrabotka detaley elastichnym instrumentom: spravochnik. [Part processing by elastic tools: reference book] Irkutsk: IrSTU Publ. House, 2013, 484 p. (in Russian).

11. Dimov, Yu.V., Shmatkova, A.V. Interaction of Lobed Wheel with Machined Surface. Russian Engineering Research, 2011, no. 7, pp. 707–711.

12. Informatsionnye sistemy. [IT systems.] Federation of European Producers of Abrasives. Available at: https://www.fepa-abrasives.com/ (accessed: 15.04.17) (in Russian).

13. Mezhgosudarstvennyy standart. Materialy shlifoval'nye. Klassifikatsiya. Zernistost' i zernovoy sostav. Metody kontrolya: GOST 3647-80. [Interstate Standard. Abrasives. Grain sizing. Graininess and fractions. Test methods: GOST 3647-80.] USSR Ministry of Machine-Tool and Toolmaking Industry. Moscow: IPK Izdatel'stvo standartov, June 2004, 18 p. (in Russian).

14. Tabenkin, A.N., Tarasov, S.B., Stepanov, S.N. Sherokhovatost', volnistost', profil'. Mezhdunarodnyy opyt. [Roughness, waviness, profile. International experience.] St. Petersburg: Politech. Uni. Publ. House, 2007, 136 p. (in Russian).

15. Packham, D.-E. Work of adhesion: contact angles and contact mechanics. International Journal of Adhesion and Adhesives, 1996, vol. 16, pp. 121-128.