CALCULATION AND DESIGN PROCEDURE OF VIBRO-SHOCK HARDENING BED GUARD FOR LONG PIECES
Abstract
The noise enclosure design for the vibro - shock har dening bed of the helicopter longerons is considered. The noise abatement performance in the operating space is shown.
About the Authors
Mikhail E. Popov
Don State Technical University
Russian Federation
Russian Federation
Victor P. Zharov
Don State Technical University
Russian Federation
Russian Federation
References
1. Shamshura, S. A. Sovershenstvovanie metodov raschyota vibroakusticheskix xarakteristik processa vibroudarnogo uprochneniya detalej na odnokoordinatny`x stankax s cel`yu obespecheniya promy`shlennoj bezopasnosti: monografiya / S. A. Shamshura, A. N. Chukarin. — Rostov-na-Donu: Izd. centr Donsk. gos. texn. un-ta, 2007. — 108 s. — In Russian.
Review
For citations:
Popov M.E., Zharov V.P. CALCULATION AND DESIGN PROCEDURE OF VIBRO-SHOCK HARDENING BED GUARD FOR LONG PIECES. Vestnik of Don State Technical University. 2012;12(1-2):102-108. (In Russ.)
Views:
322
Email this article 