DESIGN OF WELDED JOINTS PROVIDING LOW-CYCLE FATIGUE AT THE LEVEL OF BASE METAL
Abstract
The test data of welded joints with butt and fillet welds on l ow - cycle fatigue under biaxial tension in the corrosive environment are considered. Some constructive techniques for improving the fatigue strength of welde d joints through changing the weld geometrical parameters are offered.
About the Authors
Vitaly F. Lukyanov
Don State Technical University
Russian Federation
Russian Federation
Yury G. Lyudmirskiy
Don State Technical University
Russian Federation
Russian Federation
Dmitry V. Rogozin
Don State Technical University
Russian Federation
Russian Federation
References
1. Issledovanie malociklovoj ustalosti svarny`x soedinenij tipa «vvary`sh-list»: otchyot o NIR, xozdogovor № 1173/792-77 / Yu. G. Lyudmirskij i dr.; RISXM. — Rostov-na-Donu, 1978. — In Russian.
2. Luk`yanov, V. F. Ispy`taniya e`lementov korpusny`x konstrukcij pri dvuxosnom napryazhyonnom sostoyanii / V. F. Luk`yanov, Yu. G. Lyudmirskij, V. V. Naprasnikov // Zavodskaya laboratoriya. — 1986. — № 7. — S. 63—65. — In Russian.
Review
For citations:
Lukyanov V.F., Lyudmirskiy Yu.G., Rogozin D.V. DESIGN OF WELDED JOINTS PROVIDING LOW-CYCLE FATIGUE AT THE LEVEL OF BASE METAL. Vestnik of Don State Technical University. 2012;12(1-2):182-185. (In Russ.)
Views:
377
Email this article 