Monitoring of multioperational machines based on the concept of e-Mind Machine

The concept of e-Mind Machine, a system that monitors the status of multioperational machines, is considered. The existing international and domestic monitoring systems, as well as the essential aspects of monitoring specifying e-Mind Machine features are analyzed. The structure of the e-Mind Machine module organization is presented. The need for converting test data into a knowledge system when the perspective monitoring systems operate at the multioperational machines is justified. Benefits of the forecasting methods application are determined. New concepts such as fuzzy boundary of operability/reliability and fuzzy boundary of parametric uptime are introduced. It is shown that the use of the intelligent control opens up fresh opportunities for the monitoring automation. The application of the e-Mind Machine module as an onboard intelligent system maximizes the part-processing efficiency and reliability in combination with the machine self-service.

втоматизированная система мониторинга, диагностика, обслуживание, е-Mind Machine, нечеткая граница общей работоспособности/безотказности, нечеткая граница параметрической безотказности работы, ширина пограничной полосы, automated monitoring system, diagnostics, maintenance, e-Mind Machine, fuzzy boundary of operability/reliability, fuzzy boundary of parametric uptime, width of boundary strip

1. Grigoryev, S.N., Gurin, V.D., Cherkasova, N.Y. Povyshenie proizvoditel'nosti frezerovaniya s pomoshch'yu diagnostirovaniya sostoyaniya instrumenta s uchetom dostovernosti otobrazheniya sostoyaniya ob''ekta po kriteriyu ego otkaza. [Milling performance increase by instrument status diagnosis taking into account the validity of the object state display through its failure criterion.] Vestnik “MSTU “STANKIN”, 2011, no. 3(15), pp. 44–48 (in Russian).

2. Sensor Fused Intelligent Monitoring System for Machining (SIMON) project from Intelligent Manufacturing Systems (IMS). 2.4.32.2-Final-Report-SIMON. http://www.ims.org/2012/11/simon-sensor-fused-intelligent- monitoring-systemfor-machining/ (accessed: 03.12.2014).

3. . Takata, S., Kimura, F., van Houten, F.J.A.M., Westkamper, E., Shpitalni, M., Ceglarek, D., Lee, J. Maintenance: Changing Role in Life Cycle Management. CIRP Annals – Manufacturing Technology, 2004, vol. 53, no. 2, pp. 643–655].

4. Sokolov, B.V., Okhtilev, M.Y., Ptushkin, A.I. Analiz vozmozhnykh putey vnedreniya kontseptsii CL2M pri razrabotke programmnykh system. [Analysis of possible ways to introduce CL2M concept under the development of software systems.] Sistemy proektirovaniya, tekhnologicheskoy podgotovki proizvodstva i upravleniya etapami zhiznennogo tsikla promyshlennogo produkta (CAD/CAM/PDM–2010): sb. trudov 10-y mezhdunar. konf..[Systems of design, production engineering, and industrial product (CAD/CAM/PDM–2010) life cycle management: Proc. X Int. Conf.] Moscow, 2010, pp. 314– 317 (in Russian).

5. Center for Intelligent Maintenance Systems. www.imscenter.net/ (accessed: 24.09.2015).

6. Djurdjanovic, D., Lee, J., Ni, J. Watchdog Agent—an infotronics-based prognostics approach for product performance degradation assessment and prediction. Advanced Engineering Informatics, vol. 17, iss. 3-4, pp. 109-125.

7. Ni, J., Lee, J., Djurdjanovic, D. Watchdog–information technology for proactive product maintenance and its implications to ecological product re-use. Proceedings of Colloquium on E-Ecological Manufacturing. Technical University of Berlin, Germany, 2003, рp. 101-110.

8. Enterprise Asset Management. Sistemy upravleniya osnovnymi fondami predpriyatiya. Available at: www.tadviser.ru/index.php/Продукт:TRIM-PMS_%28Planned_Maintenance_System%29. [Asset management systems of the enterprise.] (accessed: 24.09.2015) (in Russian).

9. Samodurov, G.V., Tugengold, A.K., Yudenkov, N/P/. Lukyanov, E.A. Printsipy postroeniya intellektual'noy elektronnoy dokumentatsii stanka. [Principles of intelligent electronic machine documentation.] STIN, 2012, no. 7, pp. 15 (in Russian).

10. Tugengold, A.K., Tishin, A.S., Lysenko, A.F. K voprosu formirovaniya sistemy znaniy pri intellektual'nom elektronnom dokumentirovanii mekhatronnykh ob''ektov. [On knowledge system formation in intelligent electronic documentation of mechatronic objects.] Vestnik of DSTU, 2012, no. 3, pp. 30–36 (in Russian).

11. Tugengold, A.K. Smart-Passport otkrytoy mekhatronnoy tekhnologicheskoy sistemy. [Smart-Passport of an open mechatronic process system.] Intellektual'naya elektronnaya dokumentatsiya. 2013, p. 83 (in Russian).

12. Tugengold, A.K. Otsenka situatsii i prinyatie resheniy intellektual'noy sistemoy upravleniya tekhnologicheskim ob''ektom. [Intellectual control system of the technological object: situation assessment and decision-making] Vestnik of DSTU, 2010, vol. 10, no. 6, pp. 860–867 (in Russian).

13. Pospelov, D.A. Situatsionnoe upravlenie: teoriya i praktika. [Situational management: theory and practice.] Moscow: Nauka, 1986, 228 p. (in Russian).

14. Tugengold, A.K., Izyumov, A.I. Printsipy kontseptual'nogo podkhoda k sozdaniyu podsistemy "INSTRUMENT" v smart-pasporte mnogooperatsionnogo stanka. [The principles of the conceptual approach to create a «tool» subsystem for multioperational machine smart-passport.] Vestnik of DSTU, 2014, vol. 14, no. 2, pp. 74–83 (in Russian).

15. Tugengold, A.K, Shuchev, K.G., Izyumov, A.I., Terekhov, D.Y. Otsenka nechetkoy granitsy stoykosti instrumenta mnogooperatsionnogo stanka. [The estimation of fuzzy boundary of multioperational machine tool life.] Vestnik of DSTU, 2015, no. 2(81), pp. 33–41 (in Russian).

16. Tugengold, A.K., Lukyanov, E.A. Intellektual'nye funktsii i upravlenie avtonomnymi tekhnologicheskimi mekhatronnymi ob''ektami. [Intelligent functions and management of autonomous process mechatronic facilities.] Rostov-on-Don: DSTU Publ. Centre, 2013 203 p. (in Russian).

17. Kravchenko, V.М., Sidorov, V.A., Sedush, V.Y. Intellektual'nye funktsii i upravlenie avtonomnymi tekhnologicheskimi mekhatronnymi ob''ektami. [Technical diagnosis of mechanical equipment.] Donetsk: Yugo-Vostok Ltd, 2009, 459 p. (in Russian).

18. Dimitrov, V.P., Borisova, L.V., Nurutdinova, I.N. Metodika otsenki soglasovannosti modeley nechetkikh ekspertnykh znaniy. [Methods for estimating coordination of fuzzy expert knowledge models.] Vestnik of DSTU, 2010, no. 2 (45), pp. 205–216 (in Russian).