ON HEAT-SHARING RATIO IN DEFORMATION ZONE UNDER CUTTING
Abstract
The specified formula for determining the heat ratio due to the deformation in the shear plane enter ing chippings is got. The obtained results of the heat - sharing ratio calculation for the case of machining 12 Х 18 Н 10 Т heat - resistant steel by ВК 8 alloy are in satisfactory agreements with the literature data.
About the Authors
Flora A. Vistoropskaya
Don State Technical University
Russian Federation
Russian Federation
Anatoly A. Ryzhkin
Don State Technical University
Russian Federation
Russian Federation
Sergey A. Moiseyenko
Don State Technical University
Russian Federation
Russian Federation
References
1. Chichinadze, A. V. Raschyot, ispy`tanie i podbor frikcionny`x par / A. V. Chichinadze, A. G. Ginzburg. — Moskva: Nauka, 1979. — 267 s. — In Russian.
2. Reznikov, A. N. Teplofizika rezaniya / A. N. Reznikov. — Moskva: Mashinostroenie, 1968. — 288 s. — In Russian.
3. Belousov, A. I. Teplovy`e yavleniya i obrabaty`vaemost` rezaniem aviacionny`x materialov / A. I. Belousov, P. I. Bobrik, Raxman-Zade-Az i dr. — Moskva: Mashinstroenie, 1966. — 179 s. — In Russian.
4. Ry`zhkin, A. A. Teplofizicheskie processy` pri iznashivanii instrumental`ny`x rezhushhix materialov: ucheb. Posobie / A. A. Ry`zhkin. — Rostov-na-Donu: Izdatel`skij centr DGTU, 2005. — 311 s. — In Russian.
5. Zorev, N. N. Voprosy` mexaniki processa rezaniya metallov / N. N. Zorev. — Moskva: Mashgiz, 1956. — 368 s. — In Russian.
6. Obrabotka materialov lezvijny`m instrumentom, t. 5. Pod red. S. A. Klimenko. — Kiev: ISM im. Bakulya V. N., IPCz ALKON NANU, 2006. — 316 s. — In Russian.
7. Rozenberg, A. M. E`lementy` teorii processa rezaniya metallov / A. M. Rozenberg, A. N. Eryomin. — Moskva-Sverdlovsk: Mashgiz, 1956. — 319 s. — In Russian.
8. Puchkin, V. N. Vliyanie temperatury` pri obrabotke trudnoobrabaty`vaemy`x stalej rezhushhej keramikoj / V. N. Puchkin, V. G. Solonenko, L. A. Solonenko, T. V. Kononenko // STIN. — 2010. — № 5. — S. 24—27. — In Russian.
9. Ry`zhkin, A. A. Obrabotka materialov rezaniem / A. A. Ry`zhkin. — Rostov-na-Donu: Izdatel`skij centr DGTU, 1995. — 256 s. — In Russian.
Review
For citations:
Vistoropskaya F.A., Ryzhkin A.A., Moiseyenko S.A. ON HEAT-SHARING RATIO IN DEFORMATION ZONE UNDER CUTTING. Vestnik of Don State Technical University. 2012;12(6):41-46. (In Russ.)
Views:
364
Email this article 