DECISION MAKING SUPPORT SYSTEM UNDER METHOD SELECTION OF CAR PARTS STRENGTHENING PROCESS IN INTEGRATED CAD/CAM SYSTEMS
Abstract
Selection task formalization of the strengthening treatment method through engineering and technological car design in the integrated CAD/CAM is considered. Direct and inverse problems of the strengthening treatment method selection have been formulated. The decision making support system under the strengthening treatment method selection of car parts in the integrated CAD/CAM systems is offered.
About the Authors
Mikhail E. Popov
Don State Technical University
Russian Federation
Russian Federation
Mohammad I. M. Abuharb
Don State Technical University
Russian Federation
Russian Federation
References
1. Popov, M. E. Osnovy SAPR tehnologicheskih operacii uprochnyayuschei obrabotki: ucheb. posobie / M. E. Popov. – Rostov-na-Donu: RISHM, 1987. – 91 s.
2. Popov, M. E. Proektirovanie operacii uprochnyayuschei obrabotki detalei mashin metodami PPD / M. E. Popov // Uprochnyayuschie tehnologii i pokrytiya. – 2010. – №7. – S. 11–20.
3. Popov, M. E. Formalizovannoe opisanie struktury bazy dannyh metodov uprochnyayuschei obrabotki v integrirovannyh SAPR / M. E. Popov // Vestnik DGTU. – Rostov-na-Donu, 2000. – (Problemy proizvodstva mashin). – S. 88–91.
4. Gorelova, G. V. Metod optimuma nominala i ego primenenie / G. V. Gorelova, V. V. Zdor, D. V. Svecharnik. – Moskva : Energiya, 1970. – 200 s.
5. Popov, M. E. Razrabotka i postanovka produkcii na proizvodstvo na osnove strukturirovaniya funkcii kachestva / M. E. Popov, A. M. Popov // Vestnik mashinostroeniya. – 2000. – №7. – S. 52–58.
6. Maslov, N. N. Effektivnost' i kachestvo remonta avtomobilei / N. N. Maslov. – Moskva : Transport, 1981. – 304 s.
7. SAPR. Tipovye matematicheskie modeli ob'ektov proektirovaniya v mashinostroenii: metodich. ukazaniya. RD 50-464-84. – Moskva : Standarty, 1985. – 200 s.
8. Popov, M. E. Integraciya konstruktorskogo i tehnologicheskogo proektirovaniya na osnove koncepcii Concurrent Engineering / M. E. Popov, A. M. Popov // Vestnik mashinostroeniya. – 1998. – №4. – S. 41–45.
Review
For citations:
Popov M.E., Abuharb M.I. DECISION MAKING SUPPORT SYSTEM UNDER METHOD SELECTION OF CAR PARTS STRENGTHENING PROCESS IN INTEGRATED CAD/CAM SYSTEMS. Vestnik of Don State Technical University. 2011;11(3):333-342. (In Russ.)
Views:
398
Email this article 