HIGH-SPEED COUPLING EFFECT ON STATIC STABILITY OF DYNAMIC CUTTING SYSTEM
Abstract
The problem of buckling failure of the dynamic cutting system is considered. The retarded argument effect formed in the tool-to-workpiece cutting force dependencies on the elastic deformational displacement is mainly focused. Some buckling mechanisms are revealed. The stability zones within the variable parameters that characterize the retarded arguments are analyzed.
About the Authors
Vilor L. Zakovorotniy
Don State Technical University
Russian Federation
Russian Federation
Dinh Tung Pham
Don State Technical University
Russian Federation
Russian Federation
Xuan Chiem Nguyen
Don State Technical University
Russian Federation
Russian Federation
References
1. Sinergeticheskij sistemny`j sintez upravlyaemoj dinamiki metallorezhushhix stankov s uchyotom e`volyucii svyazej / V.L. Zakovorotny`j [i dr.]. – Rostov n/D: Izdatel`skij centr DGTU, 2008. – 324 s. – In Russian.
2. Zakovorotny`j V.L. Modelirovanie deformacionny`x smeshhenij instrumenta otnositel`no zagotovki pri tochenii / V.L. Zakovorotny`j, D.T. Fam, S.T. Nguen // Vestn. Donsk. gos. texn. un-ta. – 2010. – T. 10. – # 7. – S. 1005–1015. – In Russian.
3. Zakovorotny`j V.L. Modelirovanie i identifikaciya inercionny`x i dissipativny`x svojstv podsistem rezhushhego instrumenta i zagotovki pri tochenii / V.L. Zakovorotny`j, D.T. Fam, S.T. Nguen // Vestn. Donsk. gos. texn. un-ta. – 2010. – T. 10. – # 8. – S. 1165–1178. – In Russian.
4. Buxgol`cz N.N. Osnovnoj kurs teoreticheskoj mexaniki / N.N. Buxgol`cz. – M.: Nauka, 1972. – Ch. II. – 386 s. – In Russian.
5. Murashkin L.S. Prikladnaya nelinejnaya mexanika stankov / L.S. Murashkin, S.L. Murashkin. – L.: Mashinostroenie, 1971. – 192 s. – In Russian.
6. Vasil`kov D.V. Dinamika texnologicheskoj sistemy` mexanicheskoj obrabotki / D.V. Vasil`kov, V.L. Vejcz, V.S. Shevchenko. – SPb.: TOO «Inventeks», 1997. – 230 s. – In Russian.
7. Vejcz V.L. Dinamika texnologicheskix sistem / V.L. Vejcz, D.V. Vasil`kov, Yu.M. Zubarev. – SPb.: Izd-vo S.-Peterb. in-ta mashinostroeniya, 2002. – 256 s. – In Russian.
8. Kudinov V.A. Dinamika stankov / V.A. Kudinov. – M.: Mashinostroenie, 1967. – 360 s. – In Russian.
9. Sokolovskij A.P. Nauchny`e osnovy` texnologii mashinostroeniya / A.P. Sokolovskij. – M.: Mashgiz, 1955. – 514 s. – In Russian.
10. Fizicheskie osnovy` processa rezaniya metallov / pod red. V.A. Ostaf`eva. – Kiev: Vy`shha shkola, 1976. – 136 s. – In Russian.
11. Raschyot prostranstvenny`x avtokolebanij pri rezanii metallov / T.V. Putyata [i dr.] // Vestn. mashinostroeniya. – 1975. – Vy`p. 12. – In Russian.
Review
For citations:
Zakovorotniy V.L., Pham D.T., Nguyen X.Ch. HIGH-SPEED COUPLING EFFECT ON STATIC STABILITY OF DYNAMIC CUTTING SYSTEM. Vestnik of Don State Technical University. 2011;11(8-1):1169-1179. (In Russ.)
Views:
335
Email this article 