STRENGTH AND HIGH-PLASTICITY MATERIALS FRACTURE MECHANISMS UNDER DISCRETE WATER-DROPLET FLOW
Abstract
The field research results of the austenitic steel wear under the droplet impact erosion are presented. The stages of the erosive wear origin and development are considered. The leading part of the side cracks in the forming and growth of the erosion fracture craters, as specified in Marshall-Lawn model, is shown by the high-resolution scanning electron microscopy technique.
About the Authors
Valery N. Varavka
Don State Technical University.
Russian Federation
Russian Federation
Oleg V. Kudryakov
Don State Technical University
Russian Federation
Russian Federation
References
1. Seleznyov L.I. Ocenka dlitel`nosti inkubacionnogo perioda e`rozionnogo iznosa konstrukcionny`x materialov / L.I. Seleznyov, V.A. Ry`zhenkov // Teploe`nergetika. – 2005. – #4. – S.61-63. – In Russian.
2. Seleznyov L.I. E`rozionny`j iznos konstrukcionny`x materialov / L.I. Seleznyov, V.A. Ry`zhenkov // Texnologiya metallov. – 2007. – #3. – S.19-24. – In Russian.
3. Kolesnikov Yu.V. Mexanika kontaktnogo razrusheniya / Yu.V. Kolesnikov, E.M. Morozov. – M.: Izd-vo LKI, 2007. – 224 s. – In Russian.
4. Engel P.A. Analysis and design for zero impact wear // Trans. ASME: J. Lubric. Technol. – 1974. – V.96, N 3. – P.171-183.
5. Engel P.A. Impact Wear of Materials. – Amsterdam, Oxford, New-York: Elsevier Scientific publishing company, 1976. – 340 p.
6. Evans A.G. Impact damage in ceramics // Fracture Mechanics of Ceramics / Ed. by Brandt R.C. e. a. – New York: Plenum Press, 1978. V.3. P.303-331.
7. Evans A.G., Guiden M.E., Rosenblatt M. Impact damage in brittle materials in the elastic-plastic response regime // Proc. Roy. Soc., Lond., Ser.A. – 1978. V.361. N 1706. P.343-365.
8. Sheldon G.L., Finnie I. On the ductile behavior of nominally brittle materials during erosive cutting // Trans. ASME: J. Eng. Ind. – 1964. – V.86, N 4. P.387-392.
9. Sheldon G.L., Finnie I. The mechanism of material removal in the erosive cutting of brittle materials // Trans. ASME: J. Eng. Ind. – 1964. – V.86, N 4. P.393-400.
10. Marshall D.B., Lawn B.R., Evans A.G. Elastic-plastic indentation damage in ceramics: the lateral crack system // J. Amer. Ceram. Soc. – 1982. – V.65, N 11. P.561-566.
11. Ivanova V.S. Priroda ustalosti metallov / V.S. Ivanova, V.F. Terent`ev. – M.: Metallurgiya, 1975. – 454 s. – In Russian.
12. Goriczkij V.M. Struktura i ustalostnoe razrushenie / V.M. Goriczkij, V.F. Terent`ev. – M.: Metallurgiya, 1980. – 280 s. – In Russian.
13. Troshhenko V.T. Soprotivlenie ustalosti metallov i splavov: spravochnik. Ch.1 i 2 / V.T. Troshhenko, L.A. Sosnovskij. – Kiev: Naukova dumka, 1987. – 1324 s. – In Russian.
14. Mexanika razrusheniya i prochnost` materialov: sprav. posobie. V 4-x t.; pod obshh. red. V.V. Panasyuka. T.1. Osnovy` mexaniki razrusheniya / V.V. Panasyuk, A.E. Andrejkiv, V.Z. Parton. 1988. – 488 s. – Kiev: Naukova dumka, 1988. – In Russian.
15. Sinergetika i ustalostnoe razrushenie metallov: sb.; pod red. V.S. Ivanovoj. – M.: Nauka, 1989. – 246 s. – In Russian.
16. Koczan`da S. Ustalostnoe rastreskivanie metallov / S. Koczan`da; pod red. S.Ya. Yaremy`; per. s pol`sk. – M.: Metallurgiya, 1990. – 623 s. – In Russian.
Review
For citations:
Varavka V.N., Kudryakov O.V. STRENGTH AND HIGH-PLASTICITY MATERIALS FRACTURE MECHANISMS UNDER DISCRETE WATER-DROPLET FLOW. Vestnik of Don State Technical University. 2011;11(8-2):1376-1384. (In Russ.)
Views:
448
Email this article 