OFFSHORE DRILLING AND OIL PRODUCTION PLATFORM METALWORK REPAIR
Abstract
The underwater repair technique of the offshore drilling platform low-alloy steel support of 38 mm wall thickness is developed. It ensures the required quality of the weld without preheating the base metal.
About the Authors
Vitaly F. Lukyanov
Don State Technical University
Russian Federation
Russian Federation
Dmitry V. Rogozin
Don State Technical University
Russian Federation
Russian Federation
Vladimir A. Gritsykhin
Donpodvodstroymontazh, LLC, Shelf 06, LLC.
Russian Federation
Russian Federation
References
1. Kononenko, V. Ya. Podvodnaya svarka i rezka / V. Ya. Kononenko; pod obshh. red. B. E. Patona. — 2-e izd., dop. i pererab. — Kiev, 2011. — 264 s. — In Russian.
2. Xrenov, K. K. Podvodnaya e`lektricheskaya svarka i rezka metallov / K. K. Xrenov. — Moskva: Voennoe izd-vo Min-va Vooruzhyonny`x Sil SSSR, 1946. — 160 s. — In Russian.
3. Svarka i svarivaemy`e materialy`. V 3 t. T. 1. Svarivaemost` materialov. Sprav. izd. / pod red. E`. L. Makarova. — Moskva: Metallurgiya, 1991. — 528 s. — In Russian.
Review
For citations:
Lukyanov V.F., Rogozin D.V., Gritsykhin V.A. OFFSHORE DRILLING AND OIL PRODUCTION PLATFORM METALWORK REPAIR. Vestnik of Don State Technical University. 2011;11(9):1630-1636. (In Russ.)
Views:
363
Email this article 