MICROPROCESSOR SYSTEM OF CONTACTLESS CONTROL AND MEASUREMENT OF THE TORSION TORQUE
Abstract
The design of the cycle-repeat timer's way of measurement of the torsion torque is offered. The digital part of the microprocessor system is developed on the basis of the microcontroller and the circuits of the primary signal transformation. The results of the analytical research are confirmed by the experimental data.
About the Authors
A.P. POPOVRussian Federation
M.R. VINOKUROV
Russian Federation
А.А. МOISSЕYЕNKО
Russian Federation
References
1. Kyowa corp. Datchiki krutyaschego momenta. [Elektron. resurs]. Rejim dostupa: www.kyowa.ru, 2007. – 11 s.
2. Pat. 2227304 RF: MPK7 G01P3/487. Ustroistvo dlya izmereniya mgnovennoi skorosti vrascheniya / A.P. Popov, A.A. Gorshenkov; - №2227304; opubl. 20.04.2004 v BI №11..
3. Ponomarev S. D. Raschet uprugih elementov mashin i priborov. / S.D. Ponomarev, L.E. Andreeva. – M.: Mashinostroenie, 1980. – 326 s.
4. Svidetel'stvo ob oficial'noi registracii. Programma mikrokontroller dlya cifrovogo datchika vraschayuschego momenta / A.P. Popov, A.A. Moiseenko. – №14230; zareg. 23.09.2009. – M.: In-t informatizacii obrazovaniya, 2009.
Review
For citations:
POPOV A., VINOKUROV M., МOISSЕYЕNKО А. MICROPROCESSOR SYSTEM OF CONTACTLESS CONTROL AND MEASUREMENT OF THE TORSION TORQUE. Vestnik of Don State Technical University. 2010;10(2):243-248. (In Russ.)
Views:
303
Email this article 