THE IVESTIGATION OF LIQUID-MOVING SELF-FIRMING MIXTURE FOR STEEL CASTING FORMS IN ORDER TO OPTIMIZE ITS CONTENT
Abstract
The aim of the optimization of the liquid-moving self-firming mixture (LSM) content together with the regenerated sand for making steel shaped casting forms is discussed. The investigation results of the mixture main technological features during the change of its content are given. The design of mixture main technological features has been done and its optimal content has been defined. The recommenda-tions for the materials doses and the technology of the casting mixture preparation with the regener-ated sand have been given.
References
1. Noskov B.A. Razrushenie peny v jidkopodvijnyh smesyah. / B.A. Noskov, S.G. Pelyh // Tehnologicheskie svoistva jidkih samotverdeyuschih formovochnyh smesei. - M.: Nauka, 1967. - S.60-64.
2. Doroshenko S.P. Nalivnaya formovka: monogr. / S.P. Doroshenko, K.I. Vaschenko. - Kiev: Vischa shkola, 1980. - 176 s.
3. Glinskii B.A. Modelirovanie kak metod nauchnogo issledovaniya. / B.A. Glinskii, B.S. Gryaznov, B.S. Dynin, E.P. Nikitin. – M.: Izd-vo MGU, 1985.
4. Doljanskii Yu.M. Planirovanie eksperimenta pri issledovanii i optimizacii svoistv splavov./ Yu.M. Doljanskii, F.S. Novik, T.A. Chmelevat. - M.: ONTI VIAM, 1974.
5. Pribory i kontrol' svoistv ishodnyh materialov i nalivny'h samotverdeyuschih smesei / S.P. Doroshenko, K.I. Vaschenko, V.P. Avdokushin i dr. - M.: NIIMash., 1971.
6. Kontrol' vlajnosti tverdyh i sypuchih materialov/ E.S. Krichevskii, A.G. Volchenko, S.S. Galushkin; pod red. E.S. Krichevskogo. – M.: Energoatomizdat, 1986. – 136 s.
7. Kir'yanov D.V. Mathcad 13. / D.V. Kir'yanov. – SPb: BHV-Peterburg, 2006.- 608 s.
Review
For citations:
ZINCHENKO Y. THE IVESTIGATION OF LIQUID-MOVING SELF-FIRMING MIXTURE FOR STEEL CASTING FORMS IN ORDER TO OPTIMIZE ITS CONTENT. Vestnik of Don State Technical University. 2010;10(2):258-265. (In Russ.)
Views:
317
Email this article 