MPROVED PRODUCTION METHOD OF THE SCREW WORKING ELEMENT FOR SQUEESING JUICE FROM GREEN CROPS
Abstract
The squeezing process by the screw press is considered, design defects are analyzed, and the direction of the screw efficiency promotion is chosen. The operating device has been tested. Made working element tests for working capacity. The received results confirm the designed construction efficiency.
References
1. Yakovlev D.A. Vybor konstrukcii shnekovogo rabochego organa dlya otjima soka iz zelenyh rastenii / D.A. Yakovlev, A.G. Karapet'yan, N.N. Shumskaya, D.V. Rudoi // Sostoyanie i perspektivy razvitiya sel'skohozyaistvennogo mashinostroeniya: materialy mejdunar. nauchn.-prakt. konf. / Donsk. gos. tehn. un-t. – Rostov n/D, 2010 – 1 elektron. opt. disk (CD-ROM). – S. 101–105. – in Russian.
2. Pat. RF 93738, MPK B30B9/12, B30B9/14. Shnekovyi press dlya otjima soka iz rasti-tel'nogo syr'ya / A.G. Karapet'yan, D.A. Yakovlev; opubl. 2009, Byul. № 13. – in Russian.
Review
For citations:
YAKOVLEV D. MPROVED PRODUCTION METHOD OF THE SCREW WORKING ELEMENT FOR SQUEESING JUICE FROM GREEN CROPS. Vestnik of Don State Technical University. 2010;10(4):556-559. (In Russ.)
Views:
375
Email this article 