ENERGY-EFFICIENT HIGH-SPEED CURRENT SELECTOR FOR INDUCTIVE LOADINGS
Abstract
Basic methods of transient speedup when switching current in inductive loadings are considered. Their power efficiency is analyzed. The device of the forced current switching with an additional high-voltage pressure source is offered. It permits to carry out energy recovery of the magnet field.
About the Authors
Anatoly P. Popov
Omsk State Technical University
Russian Federation
Russian Federation
Alexander O. Chugulev
Omsk State Technical University
Russian Federation
Russian Federation
Mikhail R. Vinokurov
Don State Technical University
Russian Federation
Russian Federation
References
1. Bessonov L.A. Teoreticheskie osnovy elektrotehniki. Elektricheskie cepi. — M. : Gardariki, 2002. — 638 s. — in Russian.
2. Teoreticheskie osnovy elektrotehniki / K.S. Demirchyan [i dr.]. — SPb. : Piter, 2004. — T.1. — 217 s.; T. 2. — 284 s.; T. 3. — 327 s. — in Russian.
Review
For citations:
Popov A., Chugulev A., Vinokurov M. ENERGY-EFFICIENT HIGH-SPEED CURRENT SELECTOR FOR INDUCTIVE LOADINGS. Vestnik of Don State Technical University. 2010;10(5):675-682. (In Russ.)
Views:
303
Email this article 