INFLUENCE OF PULSED LASER PROCESSING OF CARBIDE CUTTING TOOLS ON METAL CUTTING PERFORMANCE
Abstract
The results of influence of job stability and cutting instruments hardening on the process efficiency, job primecost and expenses for tools are described. Recommendations on the cutting modes optimization under roughing with carbide cutting tools are given.
About the Authors
Igor A. PINAKHIN
North-Caucasian State Technical University
Russian Federation
Russian Federation
Vyacheslav G. KOPCHENKOV
North-Caucasian State Technical University
Russian Federation
Russian Federation
Valery M. GONCHAROV
North-Caucasian State Technical University
Russian Federation
Russian Federation
References
1. Klushin M.I. Optimizaciya uslovii rezaniya na tehnologicheskoi operacii / M.I. Klushin, G.V. Gostev. – Gor'kii: GPI, 1980. – 86 s. – In Russian.
2. Klushin M.I. Rezanie metallov / M.I. Klushin. – Gor'kii: GPI, 1970. – 101 s. – In Russian.
3. Igumnov B.I. Raschet optimal'nyh rejimov obrabotki dlya stankov i avtomaticheskih linii / B.I. Igumnov. – M.: Mashinostroenie, 1974. – 164 s. – In Russian.
4. Pinahin A.M. Opredelenie proizvoditel'nosti operacii s uchetom zakonomernostei rasseivaniya stoikosti instrumentov / A.M. Pinahin // Puti intensifikacii proizvodstvennyh processov pri mehanicheskoi obrabotke. – Tomsk: TPI, 1979. – S. 68-72. – In Russian.
Review
For citations:
PINAKHIN I., KOPCHENKOV V., GONCHAROV V. INFLUENCE OF PULSED LASER PROCESSING OF CARBIDE CUTTING TOOLS ON METAL CUTTING PERFORMANCE. Vestnik of Don State Technical University. 2010;10(8):1235-1240. (In Russ.)
Views:
302
Email this article 