Vol 10, No 8 (2010)
PHYSICAL AND MATHEMATICAL SCIENCES
1165-1178 366
Abstract
The question of mathematical simulation and identification of the dynamic subsystems parameters of the tool and workpiece when investigating the cutting process is considered.
1179-1183 390
Abstract
The mathematical model of subdivided hydraulic circuits that permits calculation of the fluid distribution in all points is considered.
1184-1189 468
Abstract
The construction concept, the structural features and the experimental results of dynamic behaviour of industrial electropneumatic servo drives built on the ground of the mechatronic approach are described. It is proved that such drives are of high precision and operation speed.
TECHNICAL SCIENCES
1190-1194 348
Abstract
Research results of the efficiency of multipurpose superterranean electrocatchers of harmful galvanic sprays with various geometry of electrodes and electric fields are presented.
1195-1206 354
Abstract
Mechanism of forming habit of the plants on basis of assumption that the basic process which enables growth and development of plants is water transmission through their capillary channels is considered.
1207-1218 465
Abstract
Radial non-linear dynamic performance of drilling operation on various stages is considered. Effect of some factors on non-linear dynamic performance is analysed. Special attention is paid to dynamics of radial oscillatory motions of the drill taking into account hole accuracy.
1219-1227 325
Abstract
The results of extraction-photometric method of determining anionic synthetic surface-active substances (SAS) by some trimethadione cyanic dyestuff are described. Under optimal conditions of determining anionic synthetic surface-active substances the suggested reagents allow to increase selectivity and to decrease toxicity of the method compared to the standard technique.
1228-1234 402
Abstract
Bottling machines metering accuracy is considered. Key factors affecting bottling machines accuracy are discovered.
1235-1240 298
Abstract
The results of influence of job stability and cutting instruments hardening on the process efficiency, job primecost and expenses for tools are described. Recommendations on the cutting modes optimization under roughing with carbide cutting tools are given.
1241-1244 270
Abstract
Inefficiency of the current balancing technology of the considered rotor types with the finite geometry changes is proved. The balancing technology providing rotor balance with finite axial movements of the subunits in their any relative position is offered.
1245-1254 353
Abstract
A mathematical model of the air-and-screen cleaner (grain separator) is given. Conditions and results of this process are shown.
1255-1259 315
Abstract
The technique of surface impregnation in the vibrated bed for getting ferric sulfuric microcomposites and composite materials on their basis is considered. The industrial safety aspect, namely air protection of the operating space is described.
HUMANITIES
1260-1264 321
Abstract
The knowledge society concept which originated from the information society concept is considered. A comparative analysis of two concepts is given. The shift of modern society focus from the problems of information accumulation and transfer to the knowledge production and social innovation that determine the future formation of a new civilizational type is marked.
SOCIAL SCINCES
1265-1273 271
Abstract
Ecological insurance programmes selected into the individual module of the insurance entities interaction in the general insurance system are considered. Development of the national ecological insurance system requires its governance model building based on the specific exploitation of certain natural resources and hazardous productions control.
1274-1279 329
Abstract
The concept of sustainable development and its factors, innovation activity role in the enterprise development are considered. Necessity of the control system development for the sustainability support is proved. It is considered a guarantee of the enterprises survival under the market system of management.
1280-1288 305
Abstract
Instruments of financing innovative processes in the aspect of cost refunding on innovations development are considered. Limits and possibilities of the state participation in the system priming reproduction of innovative products in the Russian economy are revealed. It is concluded that public and private mechanisms which local optimum is eliminated with cyclical swings parameters are complementary.
1289-1298 326
Abstract
Questions of project management, current situation in this field, management reforms of the scientific and scientific-technical activities of the Russian government are considered.
1299-1305 276
Abstract
Structural imperfections of the Rostov region natural management are considered. They underlie ecological problems and the effects on the natural and mental environment.
1306-1314 350
Abstract
The following problems are considered - transport infrastructure marketing support, innovation development of its material component, relevant legislative environment based on needs of the territories where infrastructural entities become localized.
1315-1322 370
Abstract
Basic directions of increase of Palestine medical institutions efficiency on the basis of application of marketing technologies (as an example of Al-Shifa hospital) are defined. Some preconditions for marketing application through modernization of medical institutions are considered. The essence of the basic modern marketing concepts which adoption into the activity of medical institutions will positively affect the development of Palestinian medical institutions is revealed.
ISSN 2687-1653 (Online)
