SYSTEM ANALYSIS PROCEDURE FORMALIZATION BY CHOOSING MATERIAL AND REQUIREMENTS TO PART STRENGTHENING TREATMENT IN INTEGRATED CAD/CAM
Abstract
The problem on the procedure formalization of the optimal selection of the constructional material and the requirements to part strengthening treatment in the integrated CAD/CAM is stated.
About the Authors
Mikhail E. Popov
Don State Technical University
Russian Federation
Russian Federation
Andrey M. Popov
Don State Technical University
Russian Federation
Russian Federation
Abuharb Mohammad
Don State Technical University
Russian Federation
Russian Federation
References
1. Popov M.E. Osnovy` SAPR texnologicheskix operacij uprochnyayushhej obrabotki: ucheb. posobie / M.E. Popov. – Rostov n/D: RISXM, 1987. – 91 s. – In Russian.
2. Popov M.E. Proektirovanie operacij uprochnyayushhej obrabotki detalej mashin metodami PPD / M.E. Popov // Uprochnyayushhie texnologii i pokry`tiya. – 2010. – №7. – S. 11–20. – In Russian.
3. Popov M.E. Formalizovannoe opisanie struktury` bazy` danny`x metodov uprochnyayushhej obrabotki v integrirovanny`x SAPR / M.E. Popov // Vestn. Donsk. gos. texn. un-ta. Seriya «Problemy` proizvodstva mashin». – Rostov n/D, 2000. – S. 88–91. – In Russian.
4. Informacionny`e i procedurny`e modeli sinteza e`kologicheski bezopasny`x texnologicheskix processov ximiko-termicheskoj obrabotki izdelij iz metallov: ucheb. posobie / E.N. Maly`gin, V.A. Nemti-nov, S.Ya. Egorov [i dr.]. – Tambov: Izd-vo Tamb. gos. texn. un-ta, 2007. – 108 s. – In Russian.
5. Zotkin V.E. Metodologiya vy`bora materialov i uprochnyayushhix texnologij v mashinostroenii: ucheb. posobie / V.E. Zotkin. – 3-e izd., pererab. i dop. – M.: Vy`ssh. shk., 2004. – 264 s. – In Russian.
6. Nadyozhnost` v texnike. Uprochnenie detalej mashin. Vy`bor rezhimov xromirovaniya po dolgovechnosti. Obshhie trebovaniya: metod. ukazaniya. RD 50-415-83. – In Russian.
7. Popov M. E. Snizhenie metalloyomkosti mashin uprochnyayushhej obrabotkoj detalej metodami PPD / M.E. Popov // Vestn. Kurgan. gos. un-ta. Seriya «Texnicheskie nauki». Vy`p. 2, ch. 1. – Kurgan, 2006. – № 1. – S. 96–98. – In Russian.
8. Kravchuk V.S. Soprotivlenie deformirovaniyu i razrusheniyu poverxnostno-uprochnyonny`x detalej mashin i e`lementov konstrukcij / V.S. Kravchuk, Yusef Abu Ajash, A.V. Kravchuk. – Odessa, 2000. – 152 s. – In Russian.
Review
For citations:
Popov M.E., Popov A.M., Mohammad A. SYSTEM ANALYSIS PROCEDURE FORMALIZATION BY CHOOSING MATERIAL AND REQUIREMENTS TO PART STRENGTHENING TREATMENT IN INTEGRATED CAD/CAM. Vestnik of Don State Technical University. 2012;12(4):42-47. (In Russ.)
Views:
348
Email this article 