DYNAMIC TURNING SYSTEM INSTABILITY THROUGH POSITIONAL COUPLING OF TREATMENT PROCESS
Abstract
The problem of the dynamic cutting system instability through the positional coupling which is formed as a result of the cutting force change depending on the elastic deformation displacements of the tool in relation to the workpiece, is considered. The cutting instability dependency on the skew-symmetric components of the system total stiffness matrix which form circulation (nonpotential) forces is shown.
About the Authors
Vilor L. Zakovorotniy
Don State Technical University
Russian Federation
Russian Federation
Dinh Tung Pham
Don State Technical University
Russian Federation
Russian Federation
Xuan Chiem Nguyen
Don State Technical University
Russian Federation
Russian Federation
References
1. Vejcz V.L. Dinamika texnologicheskix sistem / V.L. Vejcz, D.V. Vasil`kov, Yu.M. Zubarev. – SPB: Izd-vo S.-Peterb. in-ta mashinostr., 2002. – 256 s. – In Russian.
2. Kudinov V.A. Dinamika stankov / V.A. Kudinov. – M.: Mashinostroenie, 1967. – 360 s. – In Russian.
3. Vasin S.A. Povy`shenie vibroustojchivosti instrumenta pri tochenii i frezerovanii / S.A. Vasin. – M.: Mashinostroenie, 2006. – 384 s. – In Russian.
4. Zakovorotny`j V.L. Dinamika processa rezaniya. Sinergeticheskij podxod / V.L. Zakovorotny`j, M.B. Flek. – Rostov n/D: Terra, 2006. – 876 s. – In Russian.
5. Lyapunov A.M. Obshhaya zadacha ob ustojchivosti dvizheniya / A.M. Lyapunov. – M.-L.: Gostexizdat, 1950. – 124 s. – In Russian.
6. Babashin E.A. Vvedenie v teoriyu ustojchivosti / E.A. Babashin. – M.: Nauka, 1967. – 423 s. – In Russian.
7. Bellman R. Vvedenie v teoriyu matricz / R. Bellman. – M.: Nauka, 1976. – 436 s. – In Russian.
8. Buxgol`cz N.N. Osnovnoj kurs teoreticheskoj mexaniki / N.N. Buxgol`cz. – M.: Nauka, 1972. Ch.11. – 386 s. – In Russian.
9. Zakovorotny`j V.L. Matematicheskoe modelirovanie i parametricheskaya identifikaciya dinamicheskix svojstv podsistem instrumenta i zagotovki pri tochenii / V.L. Zakovorotny`j, S.T. Nguen, D.T. Fam // Izv. vuzov. Sev.-Kavk. region. Ser. Texnicheskie nauki. – 2011, #2. – S.38-46. – In Russian.
10. Afanas`ev V.N. Matematicheskaya teoriya konstruirovaniya sistem upravleniya / V.N. Afanas`ev, V.B. Kolmanovskij, V.R. Nosov. – M.: Vy`sshaya shkola, 1989. – 447 s. – In Russian.
Review
For citations:
Zakovorotniy V.L., Pham D.T., Nguyen X.Ch. DYNAMIC TURNING SYSTEM INSTABILITY THROUGH POSITIONAL COUPLING OF TREATMENT PROCESS. Vestnik of Don State Technical University. 2011;11(8-2):1335-1343. (In Russ.)
Views:
427
Email this article 