KINEMATIC PERTURBATIONS OF STATIONARY TRAJECTORIES OF SHAPE-GENERATING MOVEMENTS IN CUTTING DYNAMIC SYSTEM
Abstract
The mathematical simulation of the interaction of kinematic perturbations of the tool shape-generating movement trajectories and the workpiece is considered. They de-fine one of the key factors determining the parameters of part manufacturing accuracy. The data for the effect not only of the interacting dynamic subsystems parameters, but also of the geometrical parameters of the cutting tool on the perturbation movements is resulted.
About the Authors
Vilor L. Zakovorotniy
Don State Technical University
Russian Federation
Russian Federation
Vitaly F. Lukyanov
Don State Technical University
Russian Federation
Russian Federation
Dinh Tung Pham
Don State Technical University
Russian Federation
Russian Federation
Thu Huong Pham
Don State Technical University
Russian Federation
Russian Federation
References
1. Zakovorotny`j, V. L. Dinamika processa rezaniya. Sinergeticheskij podxod / V. L. Zakovorotny`j, M. B. Flek. — Rostov-na-Donu: Terra, 2006. — 876 s. — In Russian.
2. Sinergeticheskij sistemny`j sintez upravlyaemoj dinamiki metallorezhushhix stankov s uchyotom e`volyucii svyazej / V. L. Zakovorotny`j [i dr.]. — Rostov-na-Donu: Izd. centr DGTU, 2008. — 314 s. — In Russian.
3. Kudinov, V. A. Dinamika stankov / V. A. Kudinov. — Moskva: Mashinostroenie, 1967. — 360 s. — In Russian.
4. Gorodeczkij, Yu. I. Funkcii chuvstvitel`nosti i dinamika slozhny`x mexanicheskix sistem / Yu. I. Gorodeczkij. — Nizhnij Novgorod: Izd-vo Nizhegorodskogo gos. un-ta im. N. I. Lobachevskogo, 2006. — 236 s. — In Russian.
5. Zakovorotny`j, V. L. Modelirovanie deformacionny`x smeshhenij instrumenta otnositel`no zagotovki pri tochenii / V. L. Zakovorotny`j, Fam Din` Tung, Nguen Suan T`em // Vestnik DGTU. — 2010. — T. 10. — # 7 (50). — S. 1005—1015. — In Russian.
6. Zakovorotny`j, V. L. Modelirovanie i identifikaciya inercionny`x i dissipativny`x svojstv podsistem rezhushhego instrumenta i zagotovki pri tochenii / V. L. Zakovorotny`j, Fam Din` Tung, Nguen Suan T`em // Vestnik DGTU. — 2010. — T. 10. — # 8 (51). — S. 1165—1178. — In Russian.
7. Genkin, M. D. Metod identifikacii (opredeleniya parametrov) mexanicheskix kolebatel`ny`x sistem po e`ksperimental`ny`m AChX / M. D. Genkin, V. I. Sergeev, L. V. Suxorukov // Primenenie teorii nelinejny`x kolebanij v mexanike. — Kiev: In-t matematiki AN USSR, 1970. — S. 197—205. — In Russian.
8. E`jkxoff, P. Osnovy` identifikacii sistem upravleniya. Ocenivanie parametrov i sostoyaniya / P. E`jkxoff; per. s angl. V. A. Lotoczkogo, A. S. Mandelya; pod red. N. S. Rajbmana. — Moskva: Mir, 1975. — 680 s. — In Russian.
Review
For citations:
Zakovorotniy V.L., Lukyanov V.F., Pham D.T., Pham T.H. KINEMATIC PERTURBATIONS OF STATIONARY TRAJECTORIES OF SHAPE-GENERATING MOVEMENTS IN CUTTING DYNAMIC SYSTEM. Vestnik of Don State Technical University. 2011;11(9):1555-1563. (In Russ.)
Views:
337
Email this article 