FILLER WEAR TEST FACILITY UNDER ROLLING FRICTION
Abstract
Studies on the filler wear under the heavy loading by the hardened surface rolling friction have been carried out on the special facility using test pieces built-up with the abutting inductor through the continuous sequential melting of the prefixed batch layer.
About the Authors
Vladlen V. Rubanov
Don State Technical University
Russian Federation
Russian Federation
Sergey D. Kolotiyenko
Don State Technical University
Russian Federation
Russian Federation
References
1. Sulejmanov, V. N. Issledovanie iznashivaniya i povy`sheniya iznosostojkosti tyazhelo nagruzhyonny`x kulakov kuznechno-pressovy`x mashin, rabotayushhix v usloviyax treniya kacheniya: dis. … kand. texn. nauk. — Rostov-na-Donu, 1978. — 150 s. — In Russian.
2. A. s. 678389 SSSR. Ustanovka dlya ispy`taniya na kontaktnuyu prochnost` materialov / L. V. Krasnichenko, V. N. Sulejmanov, V. V. Rubanov, S. D. Kolotienko. — Byul. # 29, 1979. — 6 s. — In Russian.
3. A. s. 1363007 SSSR, MKI3. Obrazecz dlya ispy`taniya pokry`tij na iznos / V. V. Rubanov, S. D. Kolotienko, A. L. Pivovarov i dr. — Byul. # 48, 1987. — 4 s. — In Russian.
Review
For citations:
Rubanov V.V., Kolotiyenko S.D. FILLER WEAR TEST FACILITY UNDER ROLLING FRICTION. Vestnik of Don State Technical University. 2011;11(9):1646-1650. (In Russ.)
Views:
315
Email this article 