AUTOMATION OF METROLOGICAL MAINTENANCE AT THE ENTERPRISES
Abstract
Solution of the problem of acceleration and increase of measurement tools choice objectivity with help of database creation on ACCESS basis is considered. As a result the opportunity of a wide review of measurement tools of the set measured size, their choice according to the required metrological and technical characteristics, and getting full information on the chosen measurement tools is provided. The developed database can be used also for the registration of measurement tools, the control time sig-nalling and for other actions with measurements and test equipment at the enterprises.
About the Authors
I.G. KOSHLYAKOVA
Don State Technical University.
Russian Federation
Russian Federation
E.V. PEYEVA
Don State Technical University.
Russian Federation
Russian Federation
K.O. SUVOROVA
Don State Technical University.
Russian Federation
Russian Federation
E.A. KOSHLYAKOVA
Don State Technical University.
Russian Federation
Russian Federation
References
1. Artem'ev B.G. Spravochnoe posobie dlya rabotnikov metrologicheskih slujb / B.G. Artem'ev, S.M. Golubev. – M.: Izd-vo standartov, 2004. – 618 s.
2. Sergeev A.G. Metrologiya: ucheb.posobie / A.G. Sergeev. – M.: Logos, 2001. – 420s.
3. Deit K.Dj. Vvedenie v sistemy baz dannyh. 8-e izdanie / K.Dj. Deit. Per. s angl. – M.: Izdatel'skii dom «Vil'yams», 2005. – 1328 s.
Review
For citations:
KOSHLYAKOVA I., PEYEVA E., SUVOROVA K., KOSHLYAKOVA E. AUTOMATION OF METROLOGICAL MAINTENANCE AT THE ENTERPRISES. Vestnik of Don State Technical University. 2010;10(3):333-338. (In Russ.)
Views:
314
Email this article 