Vol 12, No 2-2 (2012)
TECHNICAL SCIENCES
5-10 440
Abstract
Saw proper motion is studied through the building and analysis of the tool mathematical model based on the ela sti c ity theory equations. The suggested mathematical model can be used for building behavior diagnostic systems
11-17 347
Abstract
The possibility of using the acoustic emission (AE) method to stud y the impregnation processes of the woven fabric is considered. In particular, it is found that the total AE curve irrespective of the sample size ca n be depicted by the general equation. The relaxation response time for the woven fabric is deduced from ex periments.
18-24 370
Abstract
The problem of getting the analytical de pendence of the output value of the controllable electrochemical resistance (CER) on the control current is considered and solved. The mathematical simulation of the transient process in the CER output circuit involving linear inductance or linear permitta nce is carried out, too.
25-31 341
Abstract
The deformation zone geometry properties are considered. The finite - element simulation tasks for contact voltages under elastoplastic strain shaping of the composite cylinder by the hole mandrelling technique are determined.
32-37 409
Abstract
The empirical factors dependences on the process parameters for the welding wires of various chemist ry are o btained for t he empirical formula permitting to calculate the wire melting rate (feed) in a wide range of current s, preheat temperatures, electrode diameters , and stick - outs under the welding in carbon dioxide on the reversed p olarity current. The calculation accuracy by the empirical formula and by the known computational melting model of the same wires is comparatively appraised. The effect of stick - out and preheat temperature increase of the welding wires on the productivity - boosting features of their melting is asse ssed.
38-41 337
Abstract
The field research on the tribocoupling resource generation with the polymer composite coating from creep and wear under the subcritical vibro - loading is resulted.
42-49 338
Abstract
The swath model in the form of the catenary curve is described . The dependence of the swath configuration on the technological process of t he belt conveyer picker is analyzed.
50-55 328
Abstract
The theory of spark discharge channel, which is one of the major parts of the electroacoustic coatin g technology, is considered. The effect of ultrasound on the spark channel development is determined.
56-61 335
Abstract
The identification problem solubility of such hardly d eterminable physical parameters for the gas main section m athematical model as the distribution averaged along the pipeline friction coefficient, and the true mean lengthways pipeline temperature when using the isothermic model version is studied. The math ematical apparatus for such identification is developed on the basis of the patterned experiment.
62-67 432
Abstract
The interaction of the grain mass and operative parts of RSM - 181 “Torum - 7 40” combine is observed. The variable decomposition simulation technique for the material flow dynamics in the grain combine is offered. T he operating process structure chart of the material flow dynamics are described.
68-74 371
Abstract
The axifugal rotating hardeni ng machinery construction of the long components is considered. High efficiency in noise abatement in the operating place up to the admissible limit values is shown.
75-79 429
Abstract
The definitions necessary for building the theoretical model describing the oscillations of the comb ine drive comp onents are given. Power transmissions of such machi nes cause the necessity of considering small oscillations as n mass of the first - order non - holonomic system. The stationary condition concept is introduced. Bottema’s key thesis on the quality change of the potential energy value in zero is realized.
80-86 384
Abstract
The effect of thermoelectric heat under cutting is considered. In the narrow feed range under the preselected cu tting speed, no - equalizing current area in the inner electrical circuit is defined
87-93 394
Abstract
Some construction solutions for the simplified combine harvesters based on the universal (croplands) and row - crop tractors, which provide harvesting with much lower expenses than under combining, are offered. The construction solutions are obtained on the basis of the models predicting the directions for the mechanical equip ment develo pment. The component parts and interaction in the harvesting aggregates are developed on the simulati on models
94-103 431
Abstract
The actual understanding of the oligoorganosiloxane fluids lubricity mechanism used as dispersion me dia of the lubricating grease under the boundary regime implemented in the transport system tribocouplings is analyzed. The oligoorganosiloxane fluids lubricity mechanism factors are revealed. The oligoorganosiloxane fluids containing mol ecules of different structures and composition are tested
HUMANITIES
104-109 425
Abstract
The wisdom phenomenon in the traditional and modern types of society is considered. The sources of i ts marginal ization, and the prospects of its revival in connection with the social context changes are discovered. The possibil ities and effects of wisdom and the other social mind forms integration are discussed.
110-116 300
Abstract
The idea on the Russian civilizational tradition specificity as the modernization key factor is prov ed. Only the cou ntries which considered th eir own cultural traditions (Japan, South Korea, China, India) have managed to successfu lly modernize themselves. The modernization of Russia cannot be reduced to the unilateral “liberaliza tion” that does not mean its waiver of democracy.
117-121 347
Abstract
The problem of the modernization in Russia is considered in terms of the social and philosophic disc ourse.
122-129 374
Abstract
The problems of the elderly family social transformation in Russia as the adaptation to the cur rent changes are co nsidered. Difficulties in solving the adaptation problems of an elderly family, the specificity and f eatures of an elderly couple under the social changes in Russia are revealed.
SOCIAL SCINCES
130-137 485
Abstract
Management organization and improvement of the effective development of the industrial enterprises a s the co mplex economic and social systems is one of the Russian economic stabilization key problems. A manage ment attribute in the publi c production is purposiveness of the management and productive processes. The identifying features of the existing and new managerial system, inherent in the national enterprises and adequat e for the new economy, are defined on the ground of the theoretica l and practical results
138-145 391
Abstract
The innovation transfer system in terms of the integration of its disjoint infrastructural elements is considered. The establishing technique of the innovative brokerage institute as the most effective innovat ion management tool is considered. The local specificity and organization of the innovation infrastructure in case of the R ostov region are analyzed.
CONCISE INFORMATION
146-149 381
Abstract
The technological prerequisites of the mo de commonality for the consumable - electrode arc welding in argon are considered. The computing chain of modes is resulted.
150-153 398
Abstract
The damper design for the high - power plants is presented. (The efficiency effect in reducing the vibration levels in th e operator’s compartment at his worksite is shown.)
154-157 347
Abstract
The checking stability calculation techniques for the guard support sections of the vibro - shock hardening stand is performed. The arched construction is accepted for the analytical model.
ISSN 2687-1653 (Online)
