NORMAL COMPONENT OF CRITICAL CUTTING FORCE IN FIXED AND FREE SHREDDING OF THICK-STALK CROPS BY DISK SHREDDER BLADES
Abstract
Impact of three different blades on the normal component of the critical cutting force is considered. The formula of the critical force normal component as a result of the knurled blade operation is presented. The formula derivation of the critical force normal component in the fixed and free shredding is described.
About the Authors
Alexander К. Fokeyev
Rubtsovsk Industrial Institute, branch of I.I. Polzunov Altay State Technical University
Russian Federation
Russian Federation
Igor A. Budashov
Rubtsovsk Design-and-Engineering Institute of Technology
Russian Federation
Russian Federation
References
1. Reznik N.E. Teoriya rezaniya lezviem i osnovy` raschyota rezhushhix apparatov / N.E. Reznik. – M.: Mashinostroenie, 1975. – 311 s. – In Russian.
2. Lyuboshicz M.I. Spravochnik po soprotivleniyu materialov / M.I. Lyuboshicz, G.M. Iczkovich. – Minsk: Vy`sshaya shkola, 1965. – 344 s. – In Russian.
3. Spravochnik konstruktora sel`skoxozyajstvenny`x mashin. V 4 tt. / pod red. M.I. Klyoczkina. – 2-e izd., pererab. i dop. – M.: Mashinostroenie, 1967. – T. 1. – 722 s. – In Russian.
4. Bosoj E.S. Rezhushhie apparaty` uborochny`x mashin / E.S. Bosoj. – M.: Mashinostroenie, 1967. – 167 s. – In Russian.
5. Belyaev N.M. Soprotivlenie materialov / N.M. Belyaev. – M.: Nauka, 1976. – 608 s. – In Russian.
6. Anur`ev V.I. Spravochnik konstruktora-mashinostroitelya. V 3 tt. / V.I. Anur`ev. – M.: Mashinostroenie, 1982. – T. 1. – 729 s. – In Russian.
7. Pisarenko G.S. Spravochnik po soprotivleniyu materialov / G.S. Pisarenko, A.P. Yakovlev, V.V. Yakovlev. – Kiev: Naukova dumka, 1975. – 704 s. – In Russian.
Review
For citations:
Fokeyev A.К., Budashov I.A. NORMAL COMPONENT OF CRITICAL CUTTING FORCE IN FIXED AND FREE SHREDDING OF THICK-STALK CROPS BY DISK SHREDDER BLADES. Vestnik of Don State Technical University. 2011;11(6):826-832. (In Russ.)
Views:
360
Email this article 