Vol 11, No 10 (2011)
PHYSICAL AND MATHEMATICAL SCIENCES
1749-1755 345
Abstract
A new method of the threshold sharing of any format file on n parts in such a way that it would be necessary to collect at least k(<n) parts for its correct recovery is offered. The proposed method can be used for decentralized filing, file transfer through the multichannel networks, and for unauthorized access protection of the information contained in the file.
TECHNICAL SCIENCES
1756-1762 298
Abstract
The correct usage fields of the quality values and criteria for the ultrasonic testing of welded products are considered.
1763-1770 426
Abstract
The mathematical simulation of wind turbine rotation and gondola turning is presented. The blade angle-of-attack distribution in azimuth of the wind turbine rotation with 30° angle of lateral wind is shown. The study shows that the nonaxial rotation flow causes critical irregularity of the angles of attack and appropriately force variation on the blades during the rotation.
1771-1779 339
Abstract
Knowledge space and basic concepts of the technical service in the agroindustrial complex are determined on the basis of the process-system approach. The taxonomic class hierarchy ontological model using OWL-diagram and the approach to the metadata content generation for its representation are offered. Protege platform has been used as an instrument.
1780-1784 262
Abstract
The probability of metal ware carburizing in the carbon-wearing powdered media under passing current through the powdered environment and the workpiece is considered. The effect of the powered coke dispersibility on the electrical resistance of the powder saturating medium is shown.
1785-1797 343
Abstract
The mathematical simulation, techniques and NC programming for processing parts of complex geometric forms at JSC ‘Rostvertol’ is resulted.
1798-1802 335
Abstract
The method of determining Fisher—Tippett distribution parameters of final volume parent population (Ас, Вс, Сс) under the sampled data of the average stress is offered. Thereby, average values of Ас, Вс, Сс parametres obtained in the repetitive simulation are recommended to use.
1803-1807 276
Abstract
The field research of the adhesion strength and creep flow of the polymeric composite coatings in the acid aquatic media is resulted.
1808-1816 311
Abstract
For the purpose of revealing the causes of grain loss after the canvas conveyer pick-up with roll, the interaction nature of its fingers in the pickup zone is determined. It is observed that the basic losses after the picker in the pickup zone of the roll are caused by its deformed fingers. The dependence of the grain loss on the deformation of picker’s fingers has been established.
1817-1823 340
Abstract
The basic exposure for the grain combine, and its effect on the motion pattern and combining are considered. The technique and algorithm of the multiparameter adaptive control of grain combine are proposed. The structure and adaptive control system elements interconnection of grain combine are observed.
1824-1830 298
Abstract
Know-how and the computer-applied diversity algorithm (removal) for the operational and critical rotation speeds of the rotor at the design stage (critical frequencies adjustment) are offered. Its application eliminates the possibility of significant axle elastic strains and specified rotor imbalances. It also reduces balancing costs providing the guaranteed quality of the process.
1831-1842 427
Abstract
Thomson spatial heat sources power is determined. It is shown that the heating spatial source helps reduce the total flow quantity entering the plate, and expand heat penetration. The volume cooling source in the tool material plate, conversely, removes an additional quantity of heat from the contact zone increasing the temperature gradient and reducing the heating zone.
1843-1849 343
Abstract
The problem on pressure distribution in the bulk material of the round silo with allowance for viscous fluid with dry internal friction is considered.
1850-1856 342
Abstract
The technique of separating the part directly relating to reliability from the machine production cost is presented. It enables to operate machine reliability at the production stage. The technique is formalized, and it can be applied to any engineering products.
1857-1866 300
Abstract
The theoretical study on the excitation of the equipment vibrations and noise emission under the dynamic testing of helicopter longerons is resulted. The dependences for determining vibration spectra in the operating space are obtained.
1867-1873 316
Abstract
Incorporation of functional water-soluble technological lubricants (FWTL) of zinc nanopowder into fractal clusters improves their greasy properties, and increases the stamping efficiency and iron plate draw-forming under the transport body parts fabrication.
HUMANITIES
1874-1880 373
Abstract
Modern methods of teaching Russian can be divided into three main areas: 1) Russian as native language, 2) Russian as non-native language, 3) Russian as foreign language. The second direction is the least developed and often misinterpreted as ‘Russian in the national school’. The experience of the Intercultural Communication Department of Herzen State Pedagogical University of Russia in organizing the teaching process of Russian as non-mother tongue, and its linguo-didactic support in the multicultural school, is closely analyzed.
1881-1887 448
Abstract
In the course of globalization the humanity has become critical of the traditional ideals of the civilization evolution. It is in the arduous quest for rational development paths, novel values capable of sorting out differences and protecting the civilization from the global disaster. Any philosophical system is time conflict resolution. Philosophical comprehension of the environmental antagonism and the way of ascending to the noosphere is attainable through the concept of cosmoharmony resting upon dialectical unity of fundamental and philosophical knowledge giving rise to a new world outlook.
1888-1895 515
Abstract
The questions of the formation of the theoretical and methodological basis for researching problems of individual and collective identity through the prism of sociocommunicative processes are considered. It is shown that the formation of human identity is attended with such processes of sociocommunicative nature as internalization and institutionalization of the axiological consciousness of the society.
1896-1903 497
Abstract
The possibilities of using the system and synergistic approaches to research society are analyzed. The concepts and principles of the system and synergetic methodological conceptions, and social models by T. Parsons, N. Luhmann, A. Davydov are considered. Society is described as a certain type of evolutionary system. Its properties and mechanisms of functioning are discovered.
1904-1911 301
Abstract
The social and philosophical analysis of the development of the law and legal socialization idea in the history of philosophical thought is given. Besides, some negative features of the legal socialization in the contemporary Russian society are revealed.
SOCIAL SCINCES
1912-1919 329
Abstract
The industrial management practice of the service industries implies that the ‘goods’ category not only specifies the tangible form transformations, but sets the basic trends of the effective operation of the sphere at large. The transformation of the ‘goods — service’ tangible component should be considered within the context of the space-time interpretations.
1920-1924 312
Abstract
The essence of science-intensive products and specificity of its manufacture in higher educational institutions is considered. The problems and prospects of the intellectual property commercialization under the current conditions of higher educational institutions functioning are stated.
CONCISE INFORMATION
1925-1927 363
Abstract
The technique for calculating the dynamics of link-lever mechanisms of the agricultural machinery, whose inertial forces due to significant parameter spread during production occur at random, is offered.
ISSN 2687-1653 (Online)
